|
|
Printer Friendly View
85093: Ecosafe Excavator Gray 20 Oz [6] (DISCONTINUED)
MSDS Last updated: 05/16/2011
Material Safety Data Sheet
acc. to ISO/DIS 11014
Printing date Revised On 05/13/2011
05/13/2011
1 Identification of the substance and manufacturer
Trade name: EXCAVATOR GRAY
Product code: IM00085093
Manufacturer/Supplier: SEYMOUR OF SYCAMORE
917 Crosby Avenue
Sycamore, IL 60178
(815)-895-9101, www.seymourpaint.com
Emergency telephone CHEMTEL 1-800-255-3924, 813-248-0585 *if located
number: outside of the U.S.*
2 Composition/information on ingredients
Chemical Description This product is a mixture of the substances listed
below with nonhazardous additions.
Dangerous components:
67-64-1 Acetone 20.83%
74-98-6 propane 15.74%
106-97-8 n-butane 9.25%
7727-43-7 barium sulphate, natural 8.79%
2807-30-9 Glycol Ether EP 5.62%
108-88-3 Toluene 5.39%
108-10-1 methyl isobutyl ketone 5.32%
107-87-9 Methyl Propyl Ketone 3.16%
1330-20-7 xylene (mix) 2.53%
110-19-0 isobutyl acetate 1.45%
7429-90-5 aluminum powder (stabilized) 1.04%
3. Hazards identification
Hazard Information: Extremely flammable liquid and vapor. Keep away from
heat, sparks, and flame.
Has narcotizing effect.
Risk phrases: Extremely flammable.
Irritating to eyes.
Possible risk of harm to the unborn child.
Safety phrases: Keep out of the reach of children.
Keep away from sources of ignition - No smoking.
Do not breathe gas/fumes/vapour/spray.
Do not empty into drains, dispose of this material and
its container at hazardous or special waste collection
point.
Wear suitable protective clothing and gloves.
If swallowed, seek medical advice immediately and show
this container or label.
Use only in well-ventilated areas.
Special precautions: Do not spray on a naked flame or any incandescent
material.
Buildup of explosive mixtures possible without
sufficient ventilation.
Effects of chronic May cause permanent brain and nervous system damage.
overexposure: Repeated overexposure can also damage kidneys, lungs,
liver, heart, and blood. Intentional misuse by
deliberately inhaling the contents may be harmful or
fatal.
NFPA ratings (0-4): Health = 1
Fire = 4
Reactivity = 3
HMIS-ratings (0-4): Health = 1
Fire = 4
Physical Hazard = 3
4. First aid measures
After inhalation: Supply fresh air; consult doctor in case of
complaints.
After skin contact: Remove contaminated clothing. Wash exposed area with
soap and water.
After eye contact: Move to fresh air. Rinse opened eye for several
minutes under running water.
After swallowing: Contact physician or poison control center.
5. Firefighting measures
Special hazards: No further relevant information available.
Protective equipment: No special measures required.
6 Accidental release measures
Personal safety Wear protective equipment. Keep unprotected persons
procedures: away.
Environmental Do not allow product to reach sewage systems or ground
precautions: water.
Additional precautions: Ensure adequate ventilation.
7 Handling and storage
Fire/exposure Do not spray on a naked flame or any incandescent
protection: material. Do not smoke. Protect from electrostatic
discharges.
Storage requirements: Observe pressurized container storage regulations.
Consult with your local authorities.
8 Exposure controls/personal protection
Components with limit values that require monitoring at the workplace:
67-64-1 Acetone
PEL 2400 mg/m³, 1000 ppm
REL 590 mg/m³, 250 ppm
TLV Short term value: 1782 mg/m³, 750 ppm
Long-term value: 1188 mg/m³, 500 ppm
BEI
74-98-6 propane
PEL 1800 mg/m³, 1000 ppm
REL 1800 mg/m³, 1000 ppm
TLV Varies mg/m³, 1000 ppm
106-97-8 n-butane
REL 1900 mg/m³, 800 ppm
TLV Varies mg/m³, 1000 ppm
7727-43-7 barium sulphate, natural
PEL 15* 5** mg/m³
*total dust **respirable fraction
REL 10* 5** mg/m³
*total dust **respirable fraction
TLV 10 mg/m³
E
108-88-3 Toluene
PEL Short-term value: C 300; 500* ppm
Long-term value: 200 ppm
*10-min peak per 8-hr shift
REL Short-term value: 560 mg/m³, 150 ppm
Long-term value: 375 mg/m³, 100 ppm
TLV 75 mg/m³, 20 ppm
NIC-BEI
108-10-1 methyl isobutyl ketone
PEL 410 mg/m³, 100 ppm
REL Short-term value: 300 mg/m³, 75 ppm
Long-term value: 205 mg/m³, 50 ppm
TLV Short-term value: 307 mg/m³, 75 ppm
Long-term value: (205) 82 mg/m³, (50) NICE-20 ppm
(BEI);NIC-A3
107-87-9 Methyl Propyl Ketone
PEL 700 mg/m³, 200 ppm
REL 530 mg/m³, 150 ppm
TLV Short-term value: 529 mg/m³, 150 ppm
1330-20-7 xylene (mix)
PEL 435 mg/m³, 100 ppm
REL Short-term value: 655 mg/m³, 150 ppm
Long-term value: 435 mg/m³, 100 ppm
TLV Short-term value: 651 mg/m³, 150 ppm
Long-term value: 434 mg/m³, 100 ppm
BEI
110-19-0 isobutyl acetate
PEL 700 mg/m³, 150 ppm
REL 700 mg/m³, 150 ppm
TLV 713 mg/m³, 150 ppm
7429-90-5 aluminum powder (stabilized)
PEL 15* 5** mg/m³
Metal dust *total dust **respirable fraction
REL 10* 5** mg/m³
Metal dust *total dust **respirable fraction
TLV 1* mg/m³
*as respirable fraction
Hygienic protection: Keep away from foodstuffs and animal feed. Wash hands
after use.
Breathing equipment: A respirator is generally not necessary when using
this product outdoors or in large open areas. In cases
where short and/or long term overexposure exists, a
charcoal filter respirator should be worn. If you
suspect overexposure conditions exist, please consult
an authority on chemical hygiene.
Hand protection: Protective gloves. The glove material has to be
impermeable and resistant to the substance. No glove
recommendation can be given.
Eye protection: Tightly sealed goggles
9 Physical and chemical properties
Odor: Aromatic
pH-value: Not determined.
Boiling point: -110°C (-166°F)
Flash point: -19°C (-2°F)
Auto igniting: Product is not self-igniting.
Danger of explosion: Stable at normal temperatures. Can may burst when
exposed to temperatures exceeding 120 degrees
fahrenheit. In use, may form flammable/explosive
vapour-air mixture.
Lower Explosion Limit: 1.7 Vol %
Upper Explosion Limit: 10.9 Vol %
Vapor Pressure: 40 PSI, 2750 hPa
Specific Gravity: Between 0.77 and 0.85 (Water equals 1.00)
VOC content: 525.1 g/l / 4.38 lb/gl
VOC content (less 50.0%
exempt solvents):
MIR Value: 1.31
Solids content: 28.8%
Other information: No further relevant information available.
10 Stability and reactivity
Conditions to avoid: Do not allow the can to exceed 120 degrees Fahrenheit.
Stable at normal temperatures.
Hazardous reactions: No dangerous reactions known.
Hazardous No dangerous decomposition products known.
decomposition:
11 Toxicological information
Skin effects: No irritant effect.
Eye effects: Irritating effect.
Sensitization: No sensitizing effects known.
12 Ecological information
Aquatic toxicity: Hazardous for water, do not empty into drains.
Other information: This product does not contain any chlorofluorocarbons
(CFC's), hydrochlorofluorocarbons (HCFC's),
perfluorocarbons (PFC's), or chlorinated solvents.
13 Disposal considerations
DISPOSAL METHOD: Dispose of in accordance with local, state, and federal
regulations. Do not puncture, incinerate, or compact. Partially empty cans
must be disposed of responsibly. Do not heat or cut empty containers with
electric or gas torches.
Recommendation: Completely empty cans should be recycled.
14 Transport information
Hazard class: 2.1
Identification number: N/A
Label 2.1+8
ADR/RID/TDG class: 2 5F Gases
UN-Number: 1950
UN proper shipping 1950 Aerosols
name:
IMDG Class: 2.1
Packaging group: II
EMS Number: F-D, S-U
Marine pollutant: No
ICAO/IATA Class: 2.1
15 Regulatory information
SARA Section 355 (extremely hazardous substances):
None of the ingredients in this product are listed.
SARA Section 313 (Specific toxic chemical listings):
108-88-3 Toluene
108-10-1 methyl isobutyl ketone
1330-20-7 xylene (mix)
7429-90-5 aluminum powder (stabilized)
TSCA: All ingredients are listed.
CPSC: This product complies with 16 CFR 1303 and does not
contain more than 90 ppm of lead.
California Proposition 65 chemicals known to cause cancer:
100-41-4 ethyl benzene
California Proposition 108-88-3 Toluene
65 chemicals known to
cause developmental
toxicity:
CANADIAN ENVIRONMENTAL All hazardous ingredients for this product appear on
PROTECTION ACT: the Canadian Domestice Substance List.
EPA:
67-64-1 Acetone I
108-88-3 Toluene II
108-10-1 methyl isobutyl ketone I
1330-20-7 xylene (mix) I
110-19-0 isobutyl acetate D
IARC:
108-88-3 Toluene 3
1330-20-7 xylene (mix) 3
ACGIH:
67-64-1 Acetone A4
108-88-3 Toluene A4
1330-20-7 xylene (mix) A4
110-19-0 isobutyl acetate A4
7429-90-5 aluminum powder (stabilized) A4
NIOSH:
1333-86-4 Carbon black
Hazard symbols: Harmful
Extremely flammable
16 Other information
This product was manufactured in the U.S.A.
The information on this sheet is based on our present knowledge. However, this
shall not constitute a guarantee for any specific product features and shall
not establish a legally valid contractual relationship.
Contact: Regulatory Affairs
Abbreviations and IMDG: International Maritime Code for Dangerous Goods
acronyms: DOT: US Department of Transportation
CAS: Chemical Abstracts Service (division of the
American Chemical Society)
NFPA: National Fire Protection Association (USA)
HMIS: Hazardous Materials Identification System (USA)
VOC: Volatile Organic Compounds (USA, EU)
ISO: International Organization for Standardization
EPA: Environmental Protection Agency
IARC: International Agency for the Research of Cancer
NIOSH: National Institute for Occupational Safety and
Health
TSCA: Toxic Substances Control Act
CPSC: Consumer Product Safety Commission
The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance.
For more product information by email, click here
Imperial Supplies LLC does not provide services and products outside the United States
|
