MSDS 71480-1

Material Safety Data sheet
May be used to comply with OSHA's Hazard
Communication Standard, 29 CFR 1910.1200.
Standard must be consulted for specific requirements.

U.S. Department of Labor
Occupational Safety and Health Administration
(Non-Mandatory Form)
Form Approved
OMB No. 1218-0072

Identity (As Used on Label and List)
DAYTONA FIBER DISCS, GRINDING/CUTOFF WHEELS

Note: Blank spaces are not permitted. If any item is not applicable,
Or no information is available, the space must be marked to indicate that.

SECTION 1

Manufacturer's Name: DAYTONA ABRASIVES

Emergency Telephone Number: 800.221.7317

Telephone Number for Information: 800.221.7317

Date Prepared: JANUARY 23, 2007

Address:  17599 SOUTH PAXTON AVENUE
          LANSING, IL  60438

SECTION II - HAZARDOUS INGREDIENTS / IDENTIFY INFORMATION

Hazardous Components           OSHA PEL   ACGIH TLV   Other limits  % (optional)
(Specific Chemical Identify:                           Recommend
Common Name(s)

Abrasive Grain: Aluminum Oxide   15mg/m3   10mg/m3                     20-30
                Silicon Carbide  15mg/m3   10mg/m3                     20-30
                Zirconia Alumina 15mg/m3   10mg/m3                     20-30

Flexible Backing:  Cloth or Paper    N/A      N/A                      28-33
Bending Resin: Phenol Resin          N/A      N/A                      13-17
               or Urea Resin
Hub: Fiberglass or Aluminum or Steel N/A      N/A                      10-25


SECTION III - PHYSICAL/CHEMICAL CHARACTERISTICS

Boiling Point    N/A              Specific Gravity (H2O=1)   N/A
Vapor Pressure (mm Hg)  N/A       Melting Point   N/A
Vapor Density (AIR = 1) N/A       Evaporation Rate (Butyl Acetate=1) N/A
Solubility in Water:  N/A

Appearance and Odor DISC OF CLOTH or PAPER COATED WITH ABRASIVE GRAIN AND RESIN
BINDER WITH FIBERGLASS, ALUMINUM OR STEEL HUB

SECTION IV - FIRE AND EXPLOSION HAZARD DATA

Flash Point (Method Used)  N/A     Flammable Limits  LEL  N/A  UEL  N/A

Extinguishing Media  CARBON DIOXIDE, FOAM, WATER, DRY CHEMICAL

Special Fire Fighting Procedures   NONE

Unusual Fire and Explosion Hazards   NONE

(Reproduce locally)                       OSHA 174, Sept. 1985

SECTION V - REACTIVITY DATA

Stability          Unstable        Conditions To Avoid  NONE
                   Stable  XX

Incompatibility (Materials to Avoid)    NONE

Hazardous Decomposition or Byproducts   NONE

Hazardous Polymerization     May Occur        Conditions to Avoid  NONE
                             Will Not Occur  XX

SECTION VI - HEALTH HAZARD DATA

Route(s) of Entry:    Inhalation? AIRBORNE DUST    Skin? N/A   Ingestion? N/A

Health Hazards (Acute and Chronic) ACUTE: BREATHING DIFFICULTY, SKIN, EYE,
NASAL AND RESPIRATORY IRRITATION

Carcinogenicity: N/A   NTP?  N/A   IARC Monograph? N/A  OSHA Regulated?  NO

Signs and Symptoms of Exposure: DEPOSITS OF MATERIAL ON THE SKIN, IN THE EYES
AND/OR NASAL PASSAGES.
COUGHING AND/OR DIFFICULTY BREATHING MAY BE PRESENT.

Medical Conditions
Generally Aggravated by Exposure  PULMONARY DISORDERS

Emergency and First Aid Procedures:  INHALATION: PROVIDE FRESH AIR
                                     SKIN CONTACT: WASH WITH SOAP AND WATER.
                                     EYE CONTACT: FLUSH WITH WATER.
                                     INGESTION: SEEK EMERGENCY TREATMENT
                                     IMMEDIATELY.

SECTION VII - PRECAUTIONS FOR SAFE HANDLING AND USE

Steps to Be Taken in Case Material is Released or Spilled  NO SPECIAL
PROCEDURES

Waste Disposal Method  BY CONVENTIONAL MEANS

Precautions to Be taken in Handling and Storing   NO SPECIAL     PROCEDURES

Others Precautions       OBSERVE RECOMMENDED RUNNING     SPEEDS

SECTION VIII - CONTROL MEASURES

Respiratory Protection (Specify Type)   UTILIZE APPROVED RESPIRATORY PROTECTION
FOR NUISANCE DUST

Ventilation      Local Exhaust   USE TO CONTROL AIRBORNE   CONCENTRATION
Special   N/A

Mechanical (General)   APPROPRIATE DUST COLLECTION RECOMMENDED   Other   N/A

Protective Gloves  RECOMMENDED TO PROTECT SKIN

Eye Protection  FACE SHIELD OR GOGGLES WHEN GRINDING

Other Protective Clothing or Equipment    NONE

Work/Hygienic Practices  ORDINARY PERSONAL CLEANLINESS PRACTICES

The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance.

© 2008 Imperial Supplies LLC Questions or comments? Contact us.