MSDS 71313

Material Safety Data Sheet
Used to comply with OSHA'S Hazard
Communication Standard, 29 CFR 1910.1200
Imperial Item No. # 071313-0

SECTION 1 - NAME AND PRODUCT

--------------------------------------------------------------------------------
NINGBO DAHUA GRINDING WHEEL CO LTD
INDUSTRIAL AREA, HENGXI TOWN, YINZHOU,
NINGBO, CHINA
PHONE:    0086-574-88065038
Fax:      0086-574-88065038
Updated:  1/06
Product:  All Type 27,28,29, and Type 1 Wheels

Flammability Rating            Reactivity Rating
X                                   X
Health                            Rating
1                                   X
Hazard Rating

            NFPA HAZARD RATING CODE

SECTION II - COMPOSITION

--------------------------------------------------------------------------------
Ingredient  % By    OSHA      CAS #     OSHA     ACGIH    Other    Carcinogen
           Weight  Regulate             PEL       TLV     Limits

Aluminum   60-80     NO     1344-28-1   N/A      10mg/m      N/A        NO
Oxide
Silicon     N/A      NO     409-21-2    N/A       N/A        N/A        NO
Carbide
Zirconium   0-12     NO     1314-23-4   N/A      10mg/m      N/A        NO
Oxide
Calcium     N/A      NO       N/A       N/A       5mg/m      N/A        NO
Hydroxide
Barium      0-7      NO       N/A      0.5mg/m   10mg/m      N/A        NO
Sulfate
Iron        0-1      NO     1317-37-9   N/A       N/A        N/A        NO
Sulfide
Fluoride    0-4      NO     16984-48-8 2.5mg/m   2.5mg/m     N/A        NO
Phenolic    0-15     NO     9003-35-4  5 P.P.M.  5 P.P.M.    N/A        NO
Resin
Fiber Glass 0-5      NO       N/A       15mg/m    10mg/m     N/A        NO
Aluminum    0.1-1    NO       N/A        N/A       N/A       N/A        NO
or Steel
Zinc         N/A     NO       N/A        N/A       N/A       N/A        NO

SECTION III - PHYSICAL/CHEMICAL CHARACTERISTICS

--------------------------------------------------------------------------------
Boiling Point                N/A          Specific Gravity  (H20 = 1)          
2-4
Vapor Pressure  (mm Hg)      N/A          Melting Point                          
  N/A
Vapor Density  (AIR = 1)     N/A          Evaporation Rate                      
N/A
Solubility in Water          Slight       Appearance/Odor   Dark colored solid. 
                                                 May give off some odor in use. 

SECTION IV - FIRE AND EXPLOSION DATA

--------------------------------------------------------------------------------
Means of Extinction    Water or carbon dioxide. Lower and Upper Explosion Limits 
                                                                           N/A   
 
Flammable Limits     N/A                 Special Fire Fighting Procedures  None
Flash Point          N/A                 Unusual Fire or Explosion Hazards None

SECTION V - REACTIVITY DATA

--------------------------------------------------------------------------------
Stable - Avoid excessive moisture, high relative humidity, temperature extremes 
and contact with acids or solvents.
Not incompatible with any materials.
Hazardous Polymerization will not occur.
Dust and organic fumes are generated in use. Do not exceed TLV'S.

SECTION VI - HEALTH HAZARD DATA

--------------------------------------------------------------------------------
Route(s) of Entry  Signs and Symptoms of Exposure    Emergency and First-Aid     
                                                     procedures
Dust Inhalation   May cause coughing and shortness   Terminate exposure and      
                  of breath during grinding.         remove to fresh air. Obtain 
                  May effect breathing capacity.     medical assistance. 
Ingestion         No known adverse effects, but not  Obtain medical assistance.  
                  recommended.          
Absorption        Not absorbed through skin.         N/A
Skin Contact      Grinding wheel may cause           Terminate exposure and      
                  abrasions. Dust may cause skin     remove to fresh air. Obtain 
                  irritation.                        medical assistance. 
Eye               Dust or fumes may cause eye        Fresh air and medical
                  irritation.                        assistance. 
Other             Excessive noise levels may exist   Cease use. Obtain medical 
                  in use.                            assistance.
                             
Medical conditions such as emphysema and astigmatic may be aggravated during 
grinding. 

SECTION VII - STORAGE HANDLING AND USE PROCEDURES

--------------------------------------------------------------------------------
Handling and storage procedures-Avoid damage to wheel. Do not drop. Do not use a 
wheel that has been damaged or dropped. Avoid excessive temperatures in storage. 
Always handle in accordance with ANSIB7.1
Normal clean up procedures should be used if material is released. 
Dispose of waste in a sanitary landfill in accordance with state, local and 
federal regulations. 
Always use in accordance with ANSI Z43.1 and OSHA 1910.215. Do not use dropped 
or damaged wheels. Do not use without machine guard in place. Do not exceed 
maximum RPM on wheel.

SECTION VIII - CONTROL MEASURES

--------------------------------------------------------------------------------
Protection          Requirement and Referrals.
Respiratory         OSHA or NIOSH approved respirator if TLV'S exceeded.
                    See OSHA 29 CFR 1910.134.
Ventilation         Local and mechanical exhaust recommended. 
                    See ANSI Z43.1. Refer to OSHA 29 CFR 
                    1910.134.
Protective Gloves   Not required but use if desired. 
Eye Protection      Required. Refer to OSHA  29 CFR 1910.133.
Hearing Protection  Required. Refer to OSHA 29 CFR 1910.95.
Other               Apron and / or face shield if desired. 
Hygienic Practices  Wash with soap and water after handling and grinding. 

                                 COMPANY USE

The information and recommendations set forth herein are taken from sources and 
references believed to be accurate and complete as of the date hereof. However,
NINGBO DAHUA GRINDING WHEEL CO LTD. Makes no expressed or implied warranty with 
respect to the accuracy of the information or the suitability of the 
recommendations, and assumes no liability to any user thereof. We cannot 
guarantee that the risks referred to above are the only risks present. The final 
choice of the application of product is thus the sole responsibility of the 
user. 

The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance.

© 2008 Imperial Supplies LLC Questions or comments? Contact us.