MSDS 7701

                            MATERIAL SAFETY DATA SHEET


Imperial Part #7701 & 7701-1

PART #  63642504616
DATE PRINTED:  NOV 02, 2001
MSDS NO.  04616A         OUTBOUND
                SpeedGrip Structural Adhesive - 5 minute - Part 1
                    (Part 2 is available as UPC#  XXXXXXXXXX)


               SECTION 1.   CHEMICAL PRODUCT AND COMPANY INFORMATION


PRODUCT NAME
SpeedGrip Structural Adhesive - 5 minute - Part 1
      (Part 2 is available as UPC# XXXXXXXXXX)

MANUFACTURER (4)
  Norton Company, 1 New Bond Street
  Worcester, MA 01615
  (254)  968-4161

EMERGENCY CONTACT
Infotrac

EMERGENCY TELEPHONE # 1
1-800-535-5053

REVISION DATE
10/30/2001

MSDS PRINT FORMAT
AUTOUSA


                SECTION 2.    COMPOSITION/INFORMATION ON INGREDIENTS


SUBSTANCE DESCRIPTION                PERCENT               CAS#
--------------------------------------------------------------------------------
Calcium Sodium aluminosilicate       7.000 - 12.000        1344 - 01 - 0
Colloidal Silica                     1.000 -  5.000        68611 - 44 - 9
MDI Polymer                          7.000 - 12.000        39310 - 05 - 9
Polyurethane polymer                 31.000 - 46.000       68400 67 - 9
@Crystalline Silica, Quartz          0.100                 14808 - 60 - 7
Talc  (no asbestos)                  7.000 - 12.000        14807 - 96 - 6
4,4 DiPhenylmeth. DiIsocyanate       35.000                101 - 68 - 8
OTHER


                        SECTION 3.   HAZARDS IDENTIFICATION


INHALATION ACUTE EXPOSURE EFFECTS
Irritation of the respiratory tract, vomiting, nausea, cough, tightness in
chest, headache

INHALATION CHRONIC EXPOSURE EFFECTS
May aggravate existing conditions of respiratory sensitization

SKIN CONTACT ACUTE EXPOSURE EFFECTS
May cause irritation of the skin.

EYE CONTACT ACUTE EXPOSURE EFFECTS
May irritate eyes.

INGESTION ACUTE EXPOSURE EFFECTS
ND

MEDICAL CONDITIONS AGGRAVATED
Asthma and any other respiratory disorders (bronchitis, emphysema,
hyperreactivity).


                          SECTION 4.   FIRST AND MEASURES


INHALATION
Remove victim to fresh air. Provide CPR and oxygen, if necessary. Contact
Physician.

SKIN CONTACT
Rinse effected areas with mild soap and water. Remove contaminated clothing.
Wash clothing before reuse.

EYE CONTACT
Flush eyes with gentle stream of water for at least 15 minutes. Contact
Physician.

INGESTION
Do not induce vomiting. If vomiting is spontaneous, keep head below waist to
prevent entry into lungs.


                        SECTION 5.   FIRE FIGHTING MEASURES


FIRE FIGHTING PROCEDURES
Fire fighters close enough to be in contact with fumes should wear
self-contained breathing apparatus. Use fog spray to cool down containers.

HAZARDOUS PRODUCTS/COMBUSTION
Oxides of carbon, hydrogen cyanide, nitrogen compounds.

FIRE AND EXPLOSION HAZARDS
Flammability - On contact with ignition source, flame or temperature above
flashpoint

EXTINGUISHING METHOD
Carbon dioxide, dry chemical, fog spray

FLASH POINT
   203.00 F      95.00 C

FLASH METHOD
UPPER EXPLOSION LIMIT
   N/A
LOWER EXPLOSION LIMIT
   N/A

HAZARD RATING SOURCE

HMIS
   HEALTH
   1
   FLAMMABILITY
   0
   REACTIVITY
   0
   OTHER


                      SECTION 6.   ACCIDENTAL RELEASE MEASURES


CLEAN-UP
Remove all ignition sources, turn off all electric motors, absorb with inert
material ventilate area. Avoid breathing vapors or dust. Neutralize with aqueous
ammonia solution.


                         SECTION 7.   HANDLING AND STORAGE


HANDLING
Sensitive to heat and moisture. Avoid contamination and keep away from all
possible ignition sources.

STORAGE
Store in flammable goods area away from direct heat and ignition

GENERAL COMMENTS


                 SECTION 8.   EXPOSURE CONTROLS/PERSONAL PROTECTION


VENTILATION PROTECTION
Handle with adequate ventilation.  See OSHA 29 CFR 1910.94
(ventilation) and 29 CFR 1910.1000  (Air contaminants).

RESPIRATORY PROTECTION
Self contained respirator if ventilation is inadequate.

SKIN PROTECTION
Rubber gloves when handling

EYE PROTECTION
Wear goggles.

OTHER PROTECTION
Faceshield

      EXPOSURE LIMITS/REGULATORY INFORMATION

SUBSTANCE DESCRIPTION           UNITS       OSHA        ACGIH   MOL
--------------------------------------------------------------------------------
Calcium Sodium aluminosilicate
                                0.0000      0.0000      0.0000
Colloidal Silica
                                0.0000      0.0000      0.0000
MDI Polymer
                                0.0000      0.0000      0.0000
Polyurethane polymer
                       PPM      0.0000      0.0000      0.0000
@Crystalline Silica, Quartz
                        MG/M3   0.1000      0.1000      0.0000
Talc  (no asbestos)
                                0.0000      0.0000      0.0000
4,4 DiPhenylmeth. DiIsocyanate
                                0.0000      0.0000      0.0000
LEGEND;
EXPOSURE LIMIT DESCRIPTIONS


                   SECTION 9.   PHYSICAL AND CHEMICAL PROPERTIES


APPEARANCE & ODOR
Liquid,  N/D

SPECIFIC GRAVITY
1.288

VAPOR PRESSURE  (mm Hg)
N/D

VAPOR DENSITY  (Air = 1.0)
1.0

EVAPORATION RATE


                       SECTION 10.   STABILITY AND REACTIVITY


INCOMPATIBILITIES
Strong acids, bases, water and excessive heat

DECOMPOSITION
Oxides of carbon, nitrogen compounds, hydrogen cyanide, various hydrocarbons

POLYMERIZATION
CONDITIONS TO AVOID
Water, heat and oxidizing agents

STABILITY
Stable.


                      SECTION 11.   TOXICOLOGICAL INFORMATION


INHALATION EFFECTS
Overexposure may cause respiratory sensitization

DERMAL EFFECTS
No significant signs or symptoms of any adverse health effects are expected to
occur.

INGESTION EFFECTS
N/A


                        SECTION 12.   ECOLOGICAL INFORMATION


CHEMICAL FATE
Not Established


                       SECTION 13.   DISPOSAL CONSIDERATIONS


WASTE DISPOSAL
Incinerate in accordance with local regulation.


                        SECTION 14.   TRANSPORT INFORMATION


DOT SHIPPING NAME


                         SECTION 15.     OTHER INFORMATION


CARCINOGENICITY
Crystalline Silica, Quartz -  IARC-1, NIOSH-X, NTP-R: Amorphous
Silica, Fused IARC-3.  NIOSH-X

CA PROP 65
This product contains a chemical (Silica) known to the State of California to
cause cancer and/or birth defects or other reproductive harm.
TSCA
Section 8 (b) - Inventory Status
All components of this product are registered under the regulations of the Toxic
Substance
Control Act.

DOMESTIC SUBSTANCE LIST
All components of this product are found on the Domestic Substance List of the
country of Canada.

DISCLAIMER
   The information provided in this Safety Data Sheet is correct to the best of
our knowledge. Information and belief at the date of its publication. The
information given is designed only as a guidance for safe handling, use,
processing, storage, transportation, disposal and release and is not to be
considered a warranty or quality specification. The information relates only to
the specific material designated and may not be valid for such material used in
combination with any other materials or in any process unless specified in the
text.

   KEY TO ABBREVIATIONS;
EQ= Equal      LT=Less Than      GT=Greater Than
AP=Approximately   TR=Trace      ND=No Data available

The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance.

© 2008 Imperial Supplies LLC Questions or comments? Contact us.