MSDS Sheet 7671

• All Products
• Fasteners
   » Grade 8
   » Grade 5
   » Threaded Fasteners
• Hardware
• Rivet & Rivet Guns
• Vehicle Lighting
• Electrical Products
• Tubing & Tube Fittings
• Air Brake Products
• Hose & Hose Ends
• Cutting Tools
• Abrasives
• Safety Products &
  Welding Supplies
• Chemicals & Paint
   » MSDS Information
   » CA/OTC Information
• Shop Supplies
• Vehicle Parts &
  Accessories
• Assortments &
  Steel Equipment
   » Assortment Listing

• Online Catalog Index
• Discontinued &
Overstock Specials

Printer-Friendly View

LUBRI PLATE® MATERIAL SAFETY DATA SHEET Section 1 -------------------------------------------------------------------------------- PRODUCT NAME OR NUMBER LUBRI PLATE No. 100, No. 105, No. 107, No. 110, No. 115 GENERIC/CHEMICAL NAME: Petroleum Lubricating Grease Manufacturer's Name Fiske Brothers Refining Co. Address: 1500 Oakdale Ave. Toledo, Ohio 43605- 129 Lockwood Street. Newark, NJ 07105 FORMULA Calcium Soap, Mineral Oil and Additives USDA AUTHORIZATION: H-2 Emergency Telephone Number 1-800-255-3924 - CHEM-TEL (24 hour) Telephone Number for Information 419-691-2491 - Toledo Office Section 2 - Hazardous Ingredients/Identity Information -------------------------------------------------------------------------------- Hazardous Components OSHA PEL ACGIH TLV Other Limits Recommended % (optional) Non-hazardous Hazardous Material Identification System (HMIS): Health - 1, Flammability - 1, Reactivity - 0 Not a Controlled Product under(WHMIS)- Canada Special Protection: See Section 9 Section 3 - Health Hazard Data -------------------------------------------------------------------------------- Threshold limit Value 5 mg/m3 for oil mist in air. OSHA Regulation 29 CFR 1910.1000 Effects of Overexposure Prolonged or repeated skin contact may cause skin irritation. Product contacting the eyes may cause eye irritation. Human health risks vary from person to person. As a precaution, exposure to liquids, vapors, mists and fumes should be minimized. This product has a low order of acute oral toxicity, but minute amounts aspirated into the lungs during ingestion may cause mild to severe pulmonary injury. Carcinogenicity: NTP? No IARC Monographs? No OSHA Regulated? No Section 4 - Emergency and First Aid Procedures -------------------------------------------------------------------------------- EYE CONTACT: Flush with clear water for 15 minutes or until irritation subsides. If irritation persists, consult a physician. SKIN CONTACT: Remove any contaminated clothing and wash with soap and warm water. If injected by high pressure under skin, regardless of the appearance or its size, contact a physician IMMEDIATELY. Delay may cause loss of affected part of the body. INHALATION: Vapor pressure is very low and inhalation at room temperature is not a problem. If overcome by vapor from hot product, immediately remove from exposure and call a physician. INGESTION: If ingested, call a physician immediately. Do not induce vomiting. Section 5 - Fire and Explosion Hazard Data -------------------------------------------------------------------------------- Flash Point (Method Used) COC - 360 F Flammable Limits LEL 0.9% UEL 7.0 % Extinguishing Media: Foam, Dry Chemical, Carbon Dioxide or Water Spray (Fog) Special Fire Fighting Procedures Cool exposed containers with water. Use air-supplied breathing equipment for enclosed or confined spaces. Unusual Fire and Explosion Hazards Do not store or mix with strong oxidants. Empty containers retain residue. Do not cut, drill, grind, or weld, as they may explode. Section 6 - Physical / Chemical Characteristics -------------------------------------------------------------------------------- Boiling Point >550 F Specific Gravity (H2O = 1) 0.89 - 0.93 Vapor Pressure (mm Hg.) <0.01 Melting Point semi-solid Vapor Density (AIR=1) >5 Evaporation Rate <0.01 Solubility in Water Negligible Appearance and Odor Smooth, off-white grease with mineral oil odor. Section 7 - Reactivity Data -------------------------------------------------------------------------------- Stability Unstable Conditions to Avoid N/A Stable X Incompatibility (Materials to Avoid) Avoid contact with strong oxidants like liquid Chlorine, concentrated oxygen. Hazardous Decomposition or By Products May form SO2. If incomplete combustion, Carbon Monoxide. Hazardous polymerization May Occur Conditions to Avoid N/A Will Not Occur X Section 8 - Spill or Leak Procedures -------------------------------------------------------------------------------- Steps to be taken in case material is released or spilled Scrape up grease, wash remainder with suitable petroleum solvent or add absorbent. Keep petroleum products out of sewers and water courses. Advise authorities if product has entered or may enter sewers and water courses. Waste disposal method Assure conformity with applicable disposal regulations. Dispose of absorbed material at an approved waste disposal facility or site. SARA/TITLE III., Section 313 Status - Zinc Compounds - <4% Section 9 - Special Protection Information -------------------------------------------------------------------------------- Respiratory Protection (Specify type) Normally not needed Ventilation Local Exhaust Used to capture fumes and vapors Special N/A Mechanical (General) Other N/A Protective Gloves Use oil-resistant gloves, if needed. Eye Protection If chance of eye contact, wear goggles. Other Protective Equipment Use oil-resistant apron, if needed. Section 10 - Special Precautions -------------------------------------------------------------------------------- Precautions to be taken in handling and storing Keep containers closed when not in use. Do not handle or store near heat, sparks, flame, or strong oxidants. Other Precautions Remove oil-soaked clothing and launder before reuse. Cleanse skin thoroughly after contact. The above information is furnished without warranty, expressed or implied, except that it is accurate to the best knowledge of Fiske Brothers Refining Company. The data on these sheets relates only to the specific material designated herein. Fiske Brothers Refining Company assumes no legal responsibility for use or reliance upon this data Date Prepared: January, 2006 Prepared by: James R. Kontak