Start an Order |
|
|
|
| Start an Order |
|||
| Home > Products > Chemicals & Paint > MSDS Sheets > MSDS 7619 -- [Back] | |||
|
MSDS 7619 7619: Strip-Calk Black [1]MSDS Last updated: 05/29/2008
MATERIAL SAFETY DATA SHEET 3M Strip-Calk (Black) PN 08578 01/22/2008
3M
MATERIAL SAFETY DATA SHEET
Copyright, 2008, 3M Company. All rights reserved. Copying and/or downloading of
this information for the purpose of properly utilizing 3M products is allowed
provided that: (1) the information is copied in full with no changes unless
prior written agreement is obtained from 3M, and (2) neither the copy nor the
original is resold or otherwise distributed with the intention of earning a
profit thereon.
SECTION 1: PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME: 3M Strip-Calk (Black) PN 08578
MANUFACTURER: 3M
DIVISION: Automotive Aftermarket
ADDRESS: 3M Center
St. Paul, MN 55144-1000
EMERGENCY PHONE: 1-800-364-3577 or (651) 737-6501 (24 hours)
Issue Date: 01/22/2008
Supercedes Date: 02/09/2006
Document Group: 05/9750/0
Product Use:
Intended use: Automotive
Specific Use: Caulk for use in seams, joints, and openings.
SECTION 2: INGREDIENTS
Ingredient C.A.S. No. % by Wt
Slag Wool None 15 - 40
Kaolin 1332-58-7 15 - 40
Polybutylene 9003-29-6 10 - 30
Aluminum Silicate 1327-36-2 3 - 7
Carbon Black 1333-86-4 1 - 5
Aluminum Stearate 637-12-7 1 - 5
Silica 7631-86-9 1 - 5
Talc 14807-96-6 0.1 - 1
Quartz Silica 14808-60-7 < 1
Bentone (R*) SD-1 Rheological Additive Trade Secret < = 1
4,4'-THIOBIS(6-TERT-BUTYL-M-CRESOL) 96-69-5 < = 0.3
SECTION 3: HAZARDS IDENTIFICATION
3.1 EMERGENCY OVERVIEW
Specific Physical Form: Viscous putty
Odor, Color, Grade: Black, soft putty
General Physical Form: Solid
Immediate health, physical, and environmental hazards:
3.2 POTENTIAL HEALTH EFFECTS
Eye Contact:
Contact with the eyes during product use is not expected to result in
significant irritation.
Skin Contact:
Contact with the skin during product use is not expected to result in
significant irritation.
Inhalation:
No health effects are expected.
Ingestion:
Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, stomach
upset, nausea, vomiting and diarrhea.
SECTION 4: FIRST AID MEASURES
4.1 FIRST AID PROCEDURES
The following first aid recommendations are based on an assumption that
appropriate personal and industrial hygiene practices are followed.
Eye Contact: Flush eyes with large amounts of water. If signs/symptoms
persist, get medical attention.
Skin Contact: Wash affected area with soap and water. If signs/symptoms
develop, get medical attention.
Inhalation: No need for first aid is anticipated.
If Swallowed: Do not induce vomiting unless instructed to do so by medical
personnel. Give victim two glasses of water. Never give anything by mouth to an
unconscious person. Get medical attention.
SECTION 5: FIRE FIGHTING MEASURES
5.1 FLAMMABLE PROPERTIES
Auto ignition temperature No Data Available
Flash Point Not Applicable
Flammable Limits - LEL Not Applicable
Flammable Limits - UEL Not Applicable
5.2 EXTINGUISHING MEDIA
Use fire extinguishers with class B extinguishing agents (e.g. dry chemical,
carbon dioxide).
5.3 PROTECTION OF FIRE FIGHTERS
Special Fire Fighting Procedures: Wear full protective equipment (Bunker Gear)
and a self-contained breathing apparatus (SCBA).
Unusual Fire and Explosion Hazards: No unusual fire or explosion hazards are
anticipated.
Note: See STABILITY AND REACTIVITY (SECTION 10) for hazardous combustion and
thermal decomposition information.
SECTION 6: ACCIDENTAL RELEASE MEASURES
Accidental Release Measures: Observe precautions from other sections. Call 3M-
HELP line (1-800-364-3577) for more information on handling and managing the
spill. Contain spill. Collect as much of the spilled material as possible. Clean
up residue.
Place in a closed container approved for transportation by appropriate
authorities.
Dispose of collected material as soon as possible.
In the event of a release of this material, the user should determine if the
release qualifies as reportable according to local, state, and federal
regulations.
SECTION 7: HANDLING AND STORAGE
7.1 HANDLING
Avoid eye contact. Do not eat, drink or smoke when using this product. Wash
exposed areas thoroughly with soap and water. Avoid prolonged or repeated skin
contact. Keep out of the reach of children. Use general dilution ventilation
and/or local exhaust ventilation to control airborne exposure to below
Occupational Exposure Limits. If ventilation is not
adequate, use respiratory protection equipment.
7.2 STORAGE
Store product at 60 F to 80 F.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1 ENGINEERING CONTROLS
Not applicable.
8.2 PERSONAL PROTECTIVE EQUIPMENT (PPE)
8.2.1 Eye/Face Protection
Avoid eye contact.
The following eye protection(s) are recommended: Safety Glasses with side
shields, Indirect Vented Goggles.
8.2.2 Skin Protection
Avoid prolonged or repeated skin contact.
Select and use gloves and/or protective clothing to prevent skin contact based
on the results of an exposure assessment. Consult with your glove and/or
protective clothing manufacturer for selection of appropriate compatible
materials.
Gloves made from the following material(s) are recommended: Neoprene, Nitrile
Rubber.
8.2.3 Respiratory Protection
Select one of the following NIOSH approved respirators based on airborne
concentration of contaminants and in accordance with OSHA regulations: Half face
piece air- purifying respirator with P95 particulate filters. Consult the
current 3M Respiratory Selection Guide for additional Information or call
1-800-243-4630 for 3M technical assistance.
8.2.4 Prevention of Swallowing
Do not eat, drink or smoke when using this product. Wash exposed areas
thoroughly with soap and water.
8.3 EXPOSURE GUIDELINES
Ingredient Authority Type Limit Additional
Information
4,4'-Thiobis(6-Tert-Butyl-M-Cresol) ACGIH TWA 10 mg/m3 Table A4
4,4'-Thiobis(6-Tert-Butyl-M-Cresol) OSHA TWA 5 mg/m3 Table Z-1
Respirable
4,4-Thiobis(6-Tert-Butyl-M-Cresol) OSHA TWA, vacated 10 mg/m3
as dust
4,4'-Thiobis(6-Tert-Butyl-M-Cresol) OSHA TWA, as 15 mg/m3 Table Z-1
total dust
Stearates ACGIH TWA, as 10 mg/m3 Table A4
total dust
VAC Vacated PEL: Vacated Permissible Exposure Limits {PEL} are enforced as the
OSHA PEL in some states. Check with your local regulatory agency.
SOURCE OF EXPOSURE LIMIT DATA:
ACGIH: American Conference of Governmental Industrial Hygienists.
CMRG: Chemical Manufacturer Recommended Guideline
OSHA: Occupational Safety and Health Administration
AIHA: American Industrial Hygiene Association Workplace Environmental
Exposure Level (WEEL)
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
Specific Physical Form: Viscous putty
Odor, Color, Grade: Black, soft putty
General Physical Form: Solid
Auto ignition temperature: No Data Available
Flash Point: Not Applicable
Flammable Limits - LEL Not Applicable
Flammable Limits - UEL Not Applicable
Boiling Point Not Applicable
Density 14.6 lb/gal
Vapor Density Not Applicable
Vapor Pressure Not Applicable
Specific Gravity 1.920 {Ref Std: WATER=1)
pH Not Applicable
Melting Point No Data Available
Solubility in Water Slight (less than 10%)
Evaporation rate Not Applicable
Volatile Organic Compounds Not Applicable
Percent volatile 00% weight
VOC Less H2O & Exempt Solvents Not Applicable
SECTION 10: STABILITY AND REACTIVITY
Stability: Stable
Materials and Conditions to Avoid: Sparks and/or flames
Hazardous Polymerization: Hazardous polymerization will not occur.
Hazardous Decomposition of By-Products
Substance Condition
Carbon monoxide Not Specified
Carbon dioxide Not Specified
SECTION 11: TOXICOLOGICAL INFORMATION
Please contact the address listed on the first page of the MSDS for
Toxicological Information on this material and/or its components.
SECTION 12: ECOLOGICAL INFORMATION
ECOTOXICOLOGICAL INFORMATION
Not determined
CHEMICAL FATE INFORMATION
Not determined
SECTION 13: DISPOSAL CONSIDERATIONS
Waste Disposal Method: Incinerate in an industrial or commercial facility in
the presence of a combustible material. As a disposal alternative, dispose of
waste product in a facility permitted to accept chemical waste.
EPA Hazardous Waste Number (RCRA): Not regulated
Since regulations vary, consult applicable regulations or authorities before
disposal.
SECTION 14: TRANSPORT INFORMATION
ID Number (s):
60-9800-1955-2
Please contact the emergency numbers listed on the first page of the MSDS for
Transportation Information for this material.
SECTION 15: REGULATORY INFORMATION
US FEDERAL REGULATIONS
Contact 3M for more information
311/312 Hazard Categories:
Fire Hazard - Yes Pressure Hazard - No Reactivity Hazard - No
Immediate Hazard - Yes Delayed Hazard - No
STATE REGULATIONS
Contact 3M for more information.
CHEMICAL INVENTORIES
The components of this product are in compliance with the chemical notification
requirements of TSCA.
All applicable chemical ingredients in this material are listed on the European
Inventory of Existing Chemical Substances (EINECS), or are exempt polymers whose
monomers are listed on EINECS.
Contact 3M for more information.
INTERNATIONAL REGULATIONS
Contact 3M for more information.
This MSDS has been prepared to meet the U.S. OSHA Hazard Communication
Standard, 29 CFR 1910.1200.
SECTION 16: OTHER INFORMATION
NFPA Hazard Classification
Health: 0 Flammability: 1 Reactivity: 0 Special Hazards: None
National Fire Protection Association (NFPA) hazard ratings are designed for use
by emergency response personnel to address the hazards that are presented by
short-term, acute exposure to a material under conditions of fire, spill, or
similar emergencies.
Hazard ratings are primarily based on the inherent physical and toxic properties
of the material but also include the toxic properties of combustion
or decomposition products that are known to be generated in significant
quantities.
Reason for Reissue: The MSDS has been revised because 3M has adopted the 16-
section ANSI/ISO format. The potential hazards of the product have not changed.
We encourage you to reread the MSDS and review the information.
Revision Changes:
Section 1: product use information was modified.
Section 16: NFPA hazard classification for health was modified.
Copyright was modified.
Section 3: Potential effects from eye contact was modified.
Section 3: Potential effects from skin contact information was modified.
Section 5: Unusual fire and explosion hazard information was modified.
Section 6: Release measures information was modified.
Section 7: Handling information was modified.
Section 8: Engineering controls information was modified.
Section 8: Eye/face protection phrase was added.
Section 14: ID Number Heading Template 1 was added.
Section 14: ID Number(s) Template 1 was added.
Section 2: Ingredient table was added.
Section 8: Exposure guidelines ingredient information was added.
Section 8: Exposure guidelines legend was added.
Section 8: Exposure guidelines data source legend was added.
Section 8: Respiratory protection information was deleted.
DISCLAIMER: The information in this Material Safety Data Sheet (MSDS) is
believed to be Correct as of the date issued. 3M MAKES NO WARRANTIES, EXPRESSED
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF COURSE OF PERFORMANCE OR
USAGE OF TRADE. User is responsible for determining whether the 3M product is
fit for a particular purpose and suitable for user's method of use or
application. Given the variety of factors that can affect the use and
application of a 3M product, some of which are uniquely within the user's
knowledge and control, it is essential that the user evaluate the 3M product to
determine whether it is fit for a particular purpose and suitable for user's
method of use or application.
3M provides information in electronic form as a service to its customers. Due
to the remote possibility that electronic transfer may have resulted in errors,
omissions or alterations in this information, 3M
Makes no representations as to its completeness or accuracy. In addition,
information obtained From a database may not be as current as the information in
the MSDS available directly from 3M.
3M MSDSs are available at www.3M.com
The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance. For more product information by email, click here Imperial Supplies LLC does not provide services and products outside the United States |
Printer-Friendly View
