Product Categories See All
Track Order Status
MSDS 0076090Printer Friendly View
7609: Lock-Ease 3.4 Fl Oz 
MSDS Last updated: 01/10/2012
AGS COMPANY Lock-Ease Lubricant MATIERAL SAFETY DATA SHEET SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Product: LE-4, LE-18, LE-20,LEC-4, Trade Name: Lock-Ease LEK-4, LEK4C, LEK-4SP LE-4BK (765-1382) Manufacturer: AGS Company Common Name: Lock Lubricant Street 2651 Hoyt St Address: City/State/Zip Muskegon Hts., MI 49444 : Phone: 800-253-0403 Phone: 231-733-2101 FAX: 231-733-1784 Transportation CHEM-TEL Original 11/12/1985 Emergency: Issue Date: Phone: 800-255-3924 Revision No 14 Date 1/8/2010 SECTION 2 - COMPOSITION/INFORMATION ON INGREDIENTS ITEM CAS NUMBER WT/WT % 1 Stoddard Solvent 8052-41-3 60-100 2 Dripless Base Compound Mixture 7-13 3 Graphite 7782-42-5 0.1-1 EXPOSURE LIMITS ACGIH OSHA ITEM TLV-TWA TLV-STEL PEL-TWA PEL-CEILING 1 100 ppm N.E. 100 ppm 500 ppm 2 N.E N.E. N.E. N.E. 3 2 mg/m³ N.E. 15 mmpcf N.E. (See Section 16 for abbreviation legend) SECTION 3 - HAZARDS IDENTIFICATION EYE CONTACT: Liquid and vapors may be irritating and can cause pain, tearing, reddening and swelling. SKIN CONTACT: Prolonged or repeated contact may result in irritation and/or dermatitis. INHALATION: Prolonged inhalation may cause headaches, dizziness and nausea. INGESTION: This material may be harmful or fatal if swallowed. CHRONIC HAZARDS: Overexposure may cause nervous system, pulmonary and kidney damage. Primary Route(s) of Entry Skin and eye contact of ingestion. SECTION 4 - FIRST AID MEASURES EYE CONTACT: Immediately flush eye with plenty of water. Get medical attention, if irritation persists. SKIN CONTACT: Immediately flush with plenty of water. Remove clothing. Get medical attention immediately. Wash clothing separately before reuse. INHALATION: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get immediate medical attention. INGESTION: Get medical attention immediately. If swallowed, DO NOT induce vomiting. Give victim a glass of water or milk. Call a physician or poison control center immediately. Never give anything by mouth to an unconscious person. SECTION 5 - FIRE FIGHTING MEASURES FLASH POINT: 101°F LOWER EXPLOSIVE LIMIT: 0.7% 38°C UPPER EXPLOSIVE LIMIT: 6% AUTOIGNITION TEMPERATURE: N.D. EXTINGUISHING MEDIA: Water fog, dry chemical, CO², foam, and alcohol foam UNUSUAL FIRE AND EXPLOSION HAZARDS: Containers(s) may explode and cause injury or death. Vapors can travel to a source of ignition and flash back. Empty containers retain product residue and can be dangerous. Do not expose container to heat, flame,. Sparks or other sources of ignition. SPECIAL FIREFIGHTING PROCEDURES: Wear NIOSH/MSHA approved self-contained breathing apparatus and protective gear. Water spray may be utilized to cool containers. SECTION 6 - ACCIDENTAL RELEASE MEASURES RECOVERY PROCEDURES: Absorb spill with inert material then place in a chemical waste container. SECTION 7 - HANDLING AND STORAGE HANDLING: Wash thoroughly after handling STORAGE: Keep away from heat, sparks, and flame. SECTION 8 - EXPOSURE CONTROLS/ PERSONAL PROTECTION ENGINEERING CONTROLS: Use in well ventilated area. Local exhaust sould be utilized to remove fumes. RESPIRATORY PROTECTION: For most conditions, no respiratory protection should be needed, however, if high vapor concentration should develop, use a NIOSH approved organic vapor respirator. SKIN PROTECTION: Where contact is likely, wear chemical resistant gloves. EYE PROTECTION: Wear safety glasses with side shields or goggles. OTHER PROTECTIVE EQUIPMENT: Eye wash in work area. HYGIENIC PRACTICES: Wash hands before eating. Remove contaminated clothing and wash before reuse. Use only in a well ventilated area. Follow all MSDS/label precautions even after container is emptied because they may retain product residues. Avoid prolonged or repeated contact with eyes, skin, and clothing. SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES BOILING RANGE 312-387°F VAPOR DENSITY: Is heavier than air 156-197°C ODOR Solvent ODOR THRESHOLD N.D. APPEARANCE Dark Gray EVAPORATION RATE Is slower than Butyl Acetate SOLUBILITY IN H?O Negligible FREEZE POINT N.D. SPECIFIC 0.7963 GRAVITY VAPOR PRESSURE 1-5 pH @ 0.0% N.A. PHYSICAL STATE Liquid VISCOSITY: N.D. COEFFICIENT OF Negligible WATER / OIL DISTRIBUTION: (See Section 16 for abbreviation legend) SECTION 10 - STABILITY AND REACTIVITY CONDITIONS TO AVOID: Sources of ignition. INCOMPATIBILITY: Strong acid or alkali, oxidizers and amines. HAZARDOUS DECOMPOSITION PRODUCTS Oxides of carbon and nitrogen. HAZARDOUS POLYMERIZATION: Will not occur under normal conditions STABILITY: This product is stable under normal storage conditions. SECTION 11 - TOXICOLOGICAL PROPERTIES PRODUCT LD-50 >5000mg/kg PRODUCT LC-50 >5500 ppm COMPONENT TOXICOLOGICAL INFORMATION: CHEMICAL NAME LD50 LC50 Stoddard Solvent >5000 mg/kg/rat >5500 mg/m³/4h/rat Dripless Base Compound N.E. N.E. Graphite N.E. N.E. SECTION 12 - ECOLOGICAL INFORMATION ECOLOGICAL INFORMATION: No information SECTION 13 - DISPOSAL CONSIDERATIONS DISPOSAL METHOD: Dispose of in accordance with federal, state and local regulations. SECTION 14 - TRANSPORTATION INFORMATION DOT PROPER SHIPPING NAME Consumer Commodity DOT TECHNICAL NAME Combustible Liquid, n.o.s. DOT HAZARD CLASS 3 HAZARD SUBCLASS 3.3 UN / NA NUMBER: NA 1993 PACKING GROUP: III RESP. GUIDE PAGE N.D. SECTION 15 - REGULATORY INFORMATION U.S FEDERAL REGULATIONS: AS FOLLOWS - OSHA: Hazardous by definition of Hazard Communication Standard (29 cfr 1910.1200) CERCLA - SARA HAZARD CATEGORY: This product has been reviewed according to the EPA "Hazard Categories' promulgated under Sections 311 and 312 of the Superfund Amendment and Reauthorization Act of 1986 (SARA Title III) and is considered, under applicable definitions, to meet the following categories: IMMEDIATE HEALTH HAZARD FIRE HAZARD SARA SECTION 313 This product contains the following substance subject to the reporting requirements of Section 313 of Title of the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372: CHEMICAL NAME CAS NUMBER WT/WT% IS LESS THAN No SARA Section 313 components exist in this % product. TOXIC SUBSTANCE CONTROL ACT: This product contains the following chemical substances subject to the reporting requirements of TSCA 12(B) if exported from the United States: CHEMICAL NAME CAS NUMBER Stoddard Solvent 8052-41-3 U.S. STATE REGULATIONS: AS FOLLOWS - NEW JERSEY RIGHT-TO-KNOW: The following materials are non-hazardous, but are among the top five components in this product: CHEMICAL NAME CAS NUMBER No non-hazardous materials are among the top five ingredients. PENNSYLVANIA RIGHT-TO-KNOW: The following non-hazardous ingredients are present in the product at greater than 3%: CHEMICAL NAME CAS NUMBER No non-hazardous ingredients are present at greater than 3% CALIFORNIA PROPOSITION 65: WARNING: The chemical(s) noted below and contained in this product, are known to the state of California to causes cancer, birth defects or other reproductive harm. CHEMICAL NAME CAS NUMBER No Proposition 65 chemicals exist in this product. INTERNATIONAL REGULATIONS: AS FOLLOWS - CANADIAN WHMIS: This MSDS has been prepared with Controlled Product Regulations except for use of the 16 headings. CANADIAN WHMIS CLASS: Class B Division 3: Combustible Liquid Class D Division 2 Subdivision B: Toxic Material WHMIS LABEL: Packaged under Consumer Chemicals and Container Regulations. SECTION 16 - OTHER INFORMATION HMIS RATINGS: Health 0 Flammability 2 Phys. Haz. 0 PPE A NFPA Health 0 Flammability 2 Reactivity 0 VOLATILE ORGANIC COMPOUNDS (VOCs): 5.74 lbs/gal 687 grams/liter LEGEND: N.A. Not Applicable N.E. Not Established N.D. Not Determined Disclaimer: The information contained herein is base on data available. However, no warranty is expressed or implied regarding the accuracy of the data or the results obtained from the use thereof. Because the information contained herein may be applied under conditions beyond our control, we assume no responsibility for its use.
The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this ' dfmt ' shall be created or inferred by any statement in this ' dfmt '. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this 'dfmt '. The user is responsible for full compliance.
For more product information by email, click here
Imperial Supplies LLC does not provide services and products outside the United States