![]() |
NATIONAL DISTRIBUTOR OF QUALITY MAINTENANCE SUPPLIES SINCE 1958 |
1-800-558-2808 | Start an Order | |
| Home > Products > Chemicals & Paint > MSDS Sheets > MSDS 7605 -- [Back] | ||||
|
Request AccountLogin
Product Search
Track Order Status
|
MSDS 7605 Printer Friendly View7585: Air Tool Oil 4 Oz Bottle [4] 7605: Air Tool Oil Quart [1] MSDS Last updated: 12/05/2011
March 1, 2010
MATERIAL SAFETY DATA SHEET
1. PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME Marvel Air Tool Oil
PRODCUT CODE MM080, MM085, MM85R, MM086, MM088R, MM089 MM,
MM85R1
CHEMICAL FAMILY Petroleum Distillates
CHEMICAL NAME Complex Mixture of Hydrocarbons
FORMULA Mixture
MANUFACTURER EMERGENCY TELEPHONE NUMBERS
Marvel Oil Company, Inc Transportation:
625 Willowbrook Centre CHEMTREC: 800-424-9300
Parkway Medical:
Willowbrook, IL 60527 ROCKY MTN POISON CTR: 800-332-3073
Phone: 630-455-3866
Fax: 630-455-3868
2. POSITION/INFORMATION ON INGREDIENTS
COMPONENT CAS NUMBER CONCENTRATION (wt%)
Naphthenic Hydrocarbons 64742-52-5 70-80
Mineral Spirits 08052-41-3 20-30
Chlorinated Hydrocarbons 00095-50-1 0-1
EXPOSURE LIMITS 8 hrs. TWA (ppm)
OSHA PEL ACGIH TLV
Naphthenic Hydrocarbons 5 as oil mist 5 as oil mist
Mineral Spirits 100 100
Chlorinated Hydrocarbons 25 25
3. HAZARDS IDENTIFICATION
POTENTIAL HEALTH EFFECTS
INHALATION: Can cause nasal and respiratory irritation, dizziness, weakness,
fatigue, nausea, headache, possible unconsciousness and even asphyxiation.
INGESTION: Can cause gastrointestinal irritation, nausea, vomiting and
diarrhea. Aspiration into lungs can cause pneumonitis which can be fatal.
SKIN CONTACT: Prolonged or repeated contact can cause moderated irritation,
defatting or dermatitis.
EYE CONTACT: Can cause severe irritation, redness, tearing or blurred vision.
4. FIRST AID MEASURES
EYE: Flush with large amounts of water, lifting upper and lower eyelids
occasionally. Get medical attention.
SKIN: Thoroughly was exposed area with soap and water. Remove contaminated
clothing. Launder before re-use.
INHALATION: Remove person to fresh air. If breathing difficult, administer
oxygen. If breathing has stopped, give artificial respiration. Keep person
warm and quiet. Call a physician.
INGESTION: Do not induce vomiting. Keep person quiet and warm. Get medical
attention. Aspiration of material into lungs can cause chemical pneumonitis
which can be fatal.
5. FIRE FIGHTING MEASURES
FLASH POINT: 128 ° F (53 ° C) TCC
EXTINGUISHING MEDIA: Carbon dioxide, dry chemical, foam.
SPECIAL FIRE FIGHTING PROCEDURES: Wear self-contained breathing apparatus with
full facepiece operated with positive pressure-demand when fighting large
fires.
6. ACCIDENTAL RELEASE MEASURES
SPILL OR LEAK PROCEDURES: Ventilate area. Remove sources of ignition. Prevent
entry into sewers and waterways. Pick up free liquid for recycle and/or
disposal. Absorb small amounts on inert material for disposal.
7. HANDLING AND STORAGE
STORAGE TEMPERATURE (MIN./MAX.): -40°F (-40°C)/ 120° F (49 C)
SHELF LIFE: 7-10 years minimum when the original container is kept tightly
closed and properly stored.
SPECIAL SENSITIVITY: None.
HANDLING AND STORAGE PRECAUTIONS: Empty containers may be dangerous since
fumes may still exist. Observe precautions given for this product as stated in
this document.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
EYE PROTECTION REQUIREMENTS: Splash goggles
SKIN PROTECTION REQUIREMENTS: Wear chemically resistant gloves.
RESPIRATOR/VENTILATION REQUIREMENTS: Provide sufficient ventilation to avoid
exposure levels above the established TLV's.
EXPOSURE LIMITS: Not established for product as whole.
Mineral Spirits NIOSH 100 ppm TWA
Oil Mist OSHA 5 mg/m3
9. PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL FORM: Thin liquid
COLOR: Red
ODOR: Petroleum
BOILING POINT: Not determined
MELT/FREEZE POINT: -60° F (-51°C)
PH: Not applicable
SOLUBILITY IN WATER: Insoluble
SPECIFIC GRAVITY: 0.876 @ 60°F (15.6 °C)
% VOLATILE BY WEIGHT: 25%
VAPOR PRESSURE: Not determined
VAPOR DENSITY: Not determined
10. REACTIVITY
STABILITY: Stable
HAZARDOUS POLYMERIZATION: Will not occur.
INCOMPATABILITIES: Strong oxidizing agents.
DECOMPOSITION PRODUCTS: Carbon monoxide, carbon dioxide and hydrocarbons.
11. TOXICOLOGICAL INFORMATION
ACUTE INHALATION: Aspiration into lungs can cause pneumonitis which can be
fatal.
CHRONIC INHALATION: Not determined.
ACUTE SKIN CONTACT: Prolonged or repeated contact can cause moderate
irritation, defatting or dermatitis.
CHRONIC SKIN CONTACT: Not determined.
ACUTE EYE CONTACT: Can cause severe irritation, redness, tearing or blurred
vision.
12. ECOLOGICAL INFORMATION
No data available
13. DISPOSAL CONSIDERATIONS
Ignitable hazardous waste, EPA Hazardous Waste Number D001
WASTE DISPOSAL METHOD: Dispose of product in accordance with all local, state
and federal laws and regulations.
14. TRANSPORT INFORMATION
DOT INFORMATION:
PROPER SHIPPING NAME: Non Bulk Not regulated
Bulk Petroleum distillates, n.o.s
TECHNICAL SHIPPING NAME: Fuel and oil additive
HAZARD CLASS: Non Bulk ORM-D
Bulk Class 3
UN NUMBER: UN 1268
PRODUCT RQ (lbs): None
LABEL: Non Bulk ORM-D
Bulk Flammable Liquid
PLACARD: Non Bulk None
Bulk Flammable Liquid
FREIGHT CLASS BULK: PG III
FREIGHT CLASS PACKAGE: None
PRODUCT LABEL None
15. REGULATORY INFORMATION
TSCA STATUS: All ingredients listed.
CERCLA REPORTABLE None
QUANTITY:
SARA TITLE III:
SECTION 302 EXREMELY None
HAZARDOUS SUBSTANCES
SECTION 311/312 HAZARD
CATEGORIES
Acute Health Yes
Chronic Health Yes
Fire Yes
Reactive No
Sudden Release of No
Pressure
SECTION 313
CHEMICAL NAME CAS NUMBER CONCENTRATION
Ortho-dichlorobenzene 00095-50-1 0-0.25%
RCRA STATUS: If discarded in its purchased form, this product would be an
ignitable waste with an EPA Hazardous Waste Number of D001. However, under
RCRA, it is the responsibility of the product user to determine at the time of
disposal, whether a material containing the product should be classified as a
hazardous waste. (40CFR261.20-24)
CANADIAN STATUS: All materials contained in this product are listed on the
Canadian Domestic Substances List.
EUROPEAN UNION: All materials contained in this product are listed on EINECS.
STATE REGULATORY INFORMATION
The following chemicals are specifically listed by individual states; other
product specific health and safety data in other sections of the MSDS may also
be applicable for state requirements. For details on your regulatory
requirements you should contact the appropriate agency in your state.
COMPONENT/CAS NUMBER CONCENTRATAION STATE CODE
p-dichlorobenzene less than 150 ppm CA
00106-46-7
CA = Material known to the state of California to cause cancer and/or birth
defects, (California Proposition 65).
16. OTHER INFORMATION
HMIS CLASSIFICATION: Health 2
Flammability 2
Reactivity 0
PPI B
NFPA RATING Health 2
Fire 2
Reactivity 0
Special None
REASON FOR ISSUE Shelf Life Up-Date
PREPARED BY James P. Heidel
TITLE Technical Director, R&D
APPROVAL DATE November 15, 2010
SUPERCEDES DATE March 1, 2010
REVISION NUMBER #09
The information is to the best of Marvel Oil Company's knowledge and belief,
accurate and reliable. However, no representation, warranty, or guarantee is
made to its accuracy, reliability or completeness. It is the users
responsibility to satisfy himself as to the suitableness and completeness of
such information for his own particular use.
The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance. For more product information by email, click here Imperial Supplies LLC does not provide services and products outside the United States |