LOGIN
Login E-mail:
Password:

Apply for an account! »
Product Search
Bottom
 

MSDS 6573

6573: Rust Treatment 10-1/4 Oz Net [12]
6573-1: Rust Treatment 10-1/4 Oz Net [6]
MSDS Last updated: 02/14/2008
Permatex, Inc.
10 Columbus Blvd.
Hartford, CT 06106 USA
Telephone: 1-87-Permatex
(877) 376-2839
Emergency: 800-255-3924
International Emergency: 813-248-0585

                    Material Safety Data Sheet
1. PRODUCT IDENTIFICATION
Product Name:            79DA RUST TREATMENT 10.25OZ AE
Item No:                 81849
Product Type:            Aerosol coating

2. COMPOSITION/INFORMATION ON INGREDIENTS
Component                Weight%        ACGIH TLV: TWA            OSHA PEL:
                                      
Dimethylether Ether      30-60          Not Listed               Not Listed
115-10-6
                                                     
2-BUTOXYETHANOL          10-30           20 ppm TWA              25 ppm TWA:
111-76-2                                                        240 mg/m3 TWA
                                                 
ACETONE                  10-30          500 ppm TWA:            1000 ppm TWA:
67-64-1                                 750 ppm STEL            2400 mg/m3 TWA
                              
VINYL TERPOLYMER           <5           10 mg/m3 TWA            15 mg/m3 TWA
27360-07-2                              total dust:            5 mg/m3 respir   
                                                               dust
                                                               
FORMIC ACID                <3           5 ppm TWA:              5 ppm TWA:
64-18-6                                 9.4 mg/m3 TWA           9 mg/m3 TWA


3. HAZARDS IDENTIFICATION
Toxicity:     Exposure to 2-butoxyethanol can cause nausea, dizziness, vomiting,
              malaise, incoordination, diarrhea,
              weakness, eye redness and swelling of conjunctiva. Intentional    
              misuse by concentrating and inhaling the
              vapor may be harmful or fatal. May cause nose, throat and         
              respiratory irritation.
Primary Routes of Entry: Eye and skin contact, ingestion, inhalation.
Signs and Symptoms of Exposure:   Excessive overexposure may cause giddiness,   
           dizziness, headache, nausea and in extreme cases  unconsciousness    
           and respiratory depression. Can cause severe and painful burns on    
         contact to eyes, skin and if taken internally.

Component           Weight%          NTP             ACGIH          IARC
                                                    Carcinogens
            
2-BUTOXYETHANOL      10-30       male rat-no evidence;   A3       Group 3;      
111-76-2                         female rat-equivocal             Monograph 88,
                                 evidence; male mice-                2006
                                 some evidence;
                                 female mice-some
                                 evidence
ACETONE              10-30       Not known            A4 - 
67-64-1                                           Not Classifiable  Not known
                                                    as a Human
                                                    Carcinogen

Medical Conditions Recognized as        Persons with preexisting respiratory,
Being Aggravated by Exposure:           liver, kidney, eye or
                                        skin diseases may be adversely affected.


4. FIRST AID MEASURES
Ingestion:        Do not induce vomiting. Slowly dilute with 1-2 glasses of
                  water or milk and seek medical attention. Never
                  give anything by mouth to an unconscious person.
Inhalation:       Move to fresh air in case of accidental inhalation of
                  vapours. Oxygen or artificial respiration if needed.
                  Obtain medical attention.
Skin Contact:     Wash off with soap and water. If skin irritation persists,
                  call a physician.
Eye Contact:      In case of contact, immediately flush eyes with plenty of
                  water for at least 15 minutes and get medical
                  attention if irritation persists.


5. FIRE FIGHTING MEASURES
Flash Point (°F/C):  Extremely flammable aerosol per flame projection test
Recommended Extinguishing Media:  Carbon Dioxide, Dry Chemicals, Foam      
Special Fire-Fighting Procedures: Firefighters should wear self-contained
                     breathing apparatus. Keep containers cool. Use equipment or
                     shielding required to protect against
                     bursting or venting of containers. Water
                     spray may be ineffective on flames
                     but should be used to keep fire-exposed containers cool.
Hazardous Products of Combustion:  Oxides of carbon, Irritating vapors
Unusual Fire/Explosion Hazards: Contents under pressure. Exposure to
                     temperatures over 120 degrees F. may cause bursting or    
                     venting. During emergency conditions overexposure
                     to decomposition products may cause a health hazard.
                     Symptoms may not be immediately apparent. Obtain medical
                     attention.

Lower Explosive Limit: Not determined
Upper Explosive Limit: Not determined

6. ACCIDENTAL RELEASE MEASURES
Spill Procedures:  Eliminate all sources of ignition. Maintain good
                   ventilation. Take up with an inert absorbent. Store in a
                   closed waste container until disposal.

7. HANDLING AND STORAGE
Storage:           Store away from heat, sparks or open flame. Do not store at
                   temperatures above 120 degrees F.
                   Exposure to high temperatures may cause container to burst.
Hanlding:          Avoid contact with skin and eyes. Do not use near heat,
                   sparks or open flame. Intentionally concentrating
                   and inhaling the vapor may be harmful or fatal. Use only in
                   a well ventilated area. Vapors may accumulate
                   readily and may ignite explosively. Wash hands before
                   eating, drinking, chewing gum, using tobacco or
                   using the toilet.


8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Eyes:              Safety glasses
Skin:              Rubber or plastic gloves.
Ventilation:       General; local exhaust ventilation as necessary to control
                   any air contaminants to within their exposure                
                   limits (or to the lowest feasible levels when limits have
                   not been established) during the use of this product.
Respiratory Protection: An approved respirator (i.e. NIOSH, etc.) should be worn
                   when exposures are expected to exceed the                    
                   applicable limits.


9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance:             Clear liquid
Odor:                   ACIDIC
Boiling Point:          Not determined
pH:                     Does not apply
Solubility in Water:    Miscible
Specific Gravity:       0.73 - 0.93
VOC Content(Wt.%):      50.4%
Vapor Pressure:         Not determined
Vapor Density (Air=1):  Heavier than air
Evaporation Rate:       >1 (butyl acetate = 1)


10. STABILITY AND REACTIVITY
Chemical Stability:       Stable at normal conditions
Hazardous Polymerization: WILL NOT OCCUR.
Incompatibilities:        Strong oxidizers
Conditions to Avoid:      Keep away from heat, sparks and open flame.
                          - No smoking
Hazardous Products of Combustion:   Oxides of carbon, Irritating vapors


11. TOXICOLOGICAL INFORMATION
See Section 3


12. ECOLOGICAL INFORMATION
No data available

13. DISPOSAL CONSIDERATIONS
Recommended Method of Disposal: Disposal should be made in accordance with
federal, state and local regulations. This container may be
recycled in aerosol recycling centers. Before offering for recycling, empty the
can by using the product according to the label. If recycling is not available,
wrap the container and discard in the trash.
US EPA Waste Number:  D001 as per 40CFR 261.21                                  
                      

14. TRANSPORTATION INFORMATION
DOT (49CFR 172)
Domestic Ground Transport
      DOT Shipping Name:         CONSUMER COMMODITY
      Hazard Class:              ORM-D
      UN/ID Number:              None
      Marine Pollutant:          None

IATA
      Proper Shipping Name:      Consumer Commodity (Not more than 1 liter)
      Class or Division:         Class 9
      UN/ID Number:              ID 8000
                        

IMDG
      Proper Shipping:          Aerosols, Limited Quantity
      Hazard Class:             Class 2.1
      UN Number:                UN 1950
       

15. REGULATORY INFORMATION
SARA 313 Chemicals: The following component(s) is listed as a SARA Section 313
Toxic Chemical.

2-BUTOXYETHANOL, FORMIC ACID

CALIFORNIA PROP 65:
WARNING: This product contains chemicals known to the State of California to
cause cancer and birth defects or other reproductive harm.

TSCA Inventory Status:
Listed on Inventory: YES All components of this product are listed (or exempt)
on the EPA TSCA inventory.

16. OTHER INFORMATION
Estimated NFPA Rating;          HEALTH 2, FLAMMABILITY 4 , REACTIVITY 1.
Estimated HMIS Classification:  HEALTH 2, FLAMMABILITY 4, PHYSICAL HAZARD 0
NFPA is a registered trademark of the National Fire Protection Assn.
HMIS is a registered trademark of the National Paint and Coatings Assn.



Prepared By:    Denise Boyd, Manager-Environmental, Health & Safety
                Revision Date: February/06/2008
Company:        Permatex. Inc. 10 Columbus Blvd. Hartford, CT USA 06106      
                Revision    1
                Number:




                                      3 of 3

The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance.

For more product information by email, click here

Imperial Supplies LLC does not provide services and products outside the United States

credit card logos