Start an Order |
|
|
|
| Start an Order |
|||
| Home > Products > Chemicals & Paint > MSDS Sheets > MSDS 6500 -- [Back] | |||
|
MSDS 6500 6500: H/D Pent. Oil 11-3/4 Oz Net [12]6500-1: H/D Pent. Oil 11-3/4 Oz Net [6] 6500-8: H/D Pent. Oil 12 Pack [1] (DISCONTINUED) 6500-9: H/D Pent. Oil 6 Pack [1] (DISCONTINUED) MSDS Last updated: 05/08/2008
MATERIAL SAFETY DATA SHEET
SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME: 6500 PENETRATING OIL
IDENTIFICATION NUMBER: 0147-28 A-7119 DATE PRINTED: 12/13/07
PRODUCT USE/CLASS: PENETRATING OIL
MANUFACTURED FOR: MANUFACTURED BY:
IMPERIAL SUPPLIES LLC IMPERIAL SUPPLIES LLC
789 ARMED FORCES DRIVE 789 ARMED FORCES DRIVE
P.O. BOX 11008 P.O. BOX 11008
GREEN BAY, WISCONSIN 54307 GREEN BAY, WISCONSIN 54307
PHONE: 920-494-7474 PHONE: 920-494-7474
EMERGENCY TELEPHONE: 920-494-7474 EMERGENCY TELEPHONE: 920-494-7474
MON-FRI / 8:00 AM - 5:00 PM MON-FRI / 8:00 AM - 5:00 PM
PREPARER: CUSTOMER SERVICE, PHONE: PREPARE DATE: 12/13/07
SECTION 2 - COMPOSITION / INFORMATION ON INGREDIENTS
WT/WT %
ITEM CHEMICAL NAME CAS NUMBER LESS THAN
01 KEROSENE 8008-20-6 50.0 %
02 PROPANE/ISOBUTANTE/N-BUTANE 68476-86-8 25.0 %
03 STODDARD SOLVENT 8052-41-3 20.0 %
EXPOSURE LIMITS
ACGIH OSHA COMPANY
ITEM TLV-TWA TLV-STEL PEL-TWA PEL-CEILING TLV-TWA SKIN
01 400 PPM N.E. 400 PPM N.E. N.E. NO
02 1000 PPM N.E. 800 PPM N.E. N.E. YES
03 100 PPM N.E. 100 PPM 500 PPM N.E. YES
(See Section 16 for abbreviation legend)
SECTION 3 - HAZARDS IDENTIFICATION
*** EMERGENCY OVERVIEW *** Vapors irritating to eyes and respiratory tract.
Vapors may cause flash fire or explosion.
EFFECTS OF OVEREXPOSURE - EYE CONTACT: Liquid, aerosols and vapors of this
product are irritating and can cause pain, tearing, reddening and swelling
accompanied by stinging sensation and/or a feeling like that of fine dust in
the eyes.
EFFECTS OF OVEREXPOSURE - SKIN CONTACT: Prolonged or repeated contact can
result in defatting and drying of the skin which may result in skin irritation
and dermatitis (rash).
EFFECTS OF OVEREXPOSURE - INHALATION: Headaches, dizziness, nausea,
decreased blood pressure, changes in heart rate and cyanosis may result from
over- exposure to vapor or skin exposure. Prolonged inhalation may be harmful.
EFFECTS OF OVEREXPOSURE - INGESTION: This material may be harmful or fatal
If swallowed. If a Corrosive product, may cause severe and permanent damage
to mouth, throat and stomach.
EFFECTS OF OVEREXPOSURE - CHRONIC HAZARDS: Over exposure may cause nervous
system damage. Overexposure may cause lung damage. Overexposure may cause
kidney damage. May cause liver disorder (e.g. edema, proteinuria) and damage.
PRIMARY ROUTE (S) OF ENTRY: SKIN CONTACT SKIN ABSORPTION INHALATION
INGESTION EYE CONTACT
SECTION 4 - FIRST AID MEASURES
FIRST AID - EYE CONTACT: Immediately flush eyes with plenty of water.
Get medical attention, if irritation persists.
FIRST AID - SKIN CONTACT: Wash with soap and water. Get medial attention
If irritation develops or persists.
FIRST AID - INHALATION: Remove to fresh air. If not breathing, give artificial
Respiration. If breathing is difficult, give oxygen. Get immediate medical
attention.
FIRST AID - INGESTION: Get medical attention immediately. If swallowed, do NOT
Induce vomiting. Give victim a glass of water or milk. Call a physician or
poison control center immediately. Never give anything by mouth to an
unconscious person.
SECTION 5 - FIRE FIGHTING MEASURES
FLASH POINT: -156 F LOWER EXPLOSIVE LIMIT: 0.7 %
(PENSKY-MARTENS C.C.) UPPER EXPLOSIVE LIMIT: 9.5 %
AUTO IGNITION TEMPERATURE: ND
EXTINGUISHING MEDIA: CO2 DRY CHEMICAL FOAM WATER FOG
UNUSUAL FIRE AND EXPLOSION HAZARDS: Vapors can travel to a source of ignition
and flash back. "Empty" containers retain product residue (liquid and/or
vapor) and can be dangerous. Do NOT PRESSURIZE, CUT, WELD, BRAZE, SOLDER, DRILL,
GRIND, OR EXPOSE SUCH CONTAINERS TO HEAT, FLAME, SPARKS, STATIC ELECTRICITY, OR
OTHER SOURCES OF IGNITION: THEY MAY EXPLODE AND CAUSE INJURY OR DEATH.
Empty drums should be completely drained, properly bunged and promptly returned
to a drum reconditioner, or properly disposed of.
SPECIAL FIREFIGHTING PROCEDURES: Containers can build up pressure if exposed to
heat (fire). As in any fire, wear self-contained breathing apparatus
pressure-demand (MSHA/NIOSH approved or equivalent) and full protective gear.
SECTION 6 - ACCIDENTAL RELEASE MEASURES
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Absorb spill with
inert material (e.g. dry sand or earth), then place in a chemical waste
container.
SECTION 7 - HANDLING AND STORAGE
HANDLING: Wash thoroughly after handling.
STORAGE: Keep away from heat, sparks and flame. Keep from freezing.
SECTION 8 - EXPOSURE CONTROLS/PERSONAL PROTECTION
ENGINEERING CONTROLS: Local exhaust ventilation may be necessary to control any
air contaminants to within their TLVs during the use of this product.
RESPIRATORY PROTECTION: A NIOSH/MSHA approved air purifying respirator with an
Organic vapor cartridge or canister may be permissible under certain
circumstances where airborne concentrations are expected to exceed exposure
limits. Protection provided by air purifying respirators is limited. Use a
positive pressure air Supplied respirator if there is any potential for an
uncontrolled release, exposure levels are not known, or any other circumstances
where air purifying respirators may not provide adequate protection.
SKIN PROTECTION: Where contact is likely, wear chemical resistant gloves, a
chemical suit, rubber boots, and chemical safety goggles plus a face shield.
EYE PROTECTION: Wear safety glasses with side shields (or goggles) and a face
shield.
OTHER PROTECTIVE EQUIPMENT: STANDARD INDUSTRIAL CLOTHING STANDARDS
SHOULD BE FOLLOWED.
HYGIENIC PRACTICES: Wash hands before eating. Remove contaminated clothing and
Wash before reuse. Use only in a well ventilated area. Follow all MSDS/label
precautions even after container is emptied because they may retain product
residues. Avoid prolonged or repeated contact with skin. Avoid breathing vapors
from heated material. Avoid contact with eyes, skin, and clothing.
SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES
BOILING RANGE: -43 - 522 F VAPOR DENSITY: Is heavier than air
ODOR: SOLVENT ODOR THRESHOLD: ND
APPEARANCE: AMBER EVAPORATION RATE: Is faster than Butyl
SOLUBILITY IN H20: NEGLIGIBLE Acetate
FREEZE POINT: 32 SPECIFIC GRAVITY: 0.7285
VAPOR PRESSURE: 80-90 Ph @ 0.0 %: NA
PHYSICAL STATE: OIL VISCOSITY: OIL
COEFFICIENT OF WATER/OIL DISTRIBUTION: COMPLETE
(See Section 16 for abbreviation legend)
SECTION 10 - STABILITY AND REACTIVITY
CONDITIONS TO AVOID: ALL SOURCES OF IGNITION, WELDING ARCS, AND OPEN FLAMES.
INCOMPATIBILITY: STRONG ACIDS, ALKALIS, OXIDIZERS, AND AMINES.
HAZARDOUS DECOMPOSITION PRODUCTS: OXIDES OF CARBON, OXIDES OF NITROGEN,
AND MAY PRODUCE FORMS OF CHLORIDE, CHLORINE, AND PHOSGENE.
HAZARDOUS POLYMERIZATION: Will not occur under normal conditions.
STABILITY: This product is stable under normal storage conditions.
SECTION 11 - TOXICOLOGICAL PROPERTIES
PRODUCT LD50: 5000 mg/kg PRODUCT LC50: 5000 ppm
COMPONENT TOXICOLOGICAL INFORMATION:
CHEMICAL NAME LD50 LC50
KEROSENE >5000 MG/KG/RAT >5000 MG/M3/4H/RAT
PROPANE/ISOBUTANE/N-BUTANE NE 65800 MG/M3/4H/RAT
STODDARD SOLVENT >5000 MG/KG/RAT >5500 MG/M3/4H/RAT
HYDRO TREATED, SEVERE, LT. NAPHTHENIC DI NE NE
GEAR LUBE NE NE
SECTION 12 - ECOLOGICAL INFORMATION
ECOLOGICAL INFORMATION: No Information.
SECTION 13 - DISPOSAL CONSIDERATIONS
DISPOSAL METHOD: DISPOSE IN ACCORDANCE WITH ALL FEDERAL, STATE, AND LOCAL
REGULATIONS.
SECTION 14 - TRANSPORTATION INFORMATION
DOT PROPER SHIPPING NAME: CONSUMER COMMODITY
DOT TECHNICAL NAME: ORM-D
DOT HAZARD CLASS: HAZARD SUBCLASS:
DOT UN/NA NUMBER: PACKING GROUP: RESP. GUIDE PAGE:
SECTION 15 - REGULATORY INFORMATION
U.S. FEDERAL REGULATIONS: AS FOLLOWS -
OSHA: Hazardous by definition of Hazard Communication Standard (29 CFR
1910.1200)
CERCLA - SARA HAZARD CATEGORY:
This product has been reviewed according to the EPA 'Hazard Categories'
Promulgated under Sections 311 and 312 of the Superfund Amendment and
Reauthorization Act of 1986 (SARA Title III) and is considered, under
applicable definitions, to meet the following categories:
IMMEDIATE HEALTH HAZARD CHRONIC HEALTH HAZARD FIRE HAZARD PRESSURIZED
GAS HAZARD
SARA SECTION 313:
This product contains the following substances subject to the reporting
requirements of Section 313 of Title III of the Superfund Amendments and
Reauthorization Act of 1986 and 40 CFR Part 372:
CHEMICAL NAME CAS NUMBER WT/WT% IS LESS THAN
No SARA Section 313 components exist in this product.
TOXIC SUBSTANCES CONTROL ACT:
This product contains the following chemical substances subject to the
reporting requirements of TSCA 12(B) if exported from the United States:
CHEMICAL NAME CAS NUMBER
KEROSENE 8008-20-6
STODDARD SOLVENT 8052-41-3
U.S. STATE REGULATIONS: AS FOLLOWS -
NEW JERSEY RIGHT-TO-KNOW:
The following materials are non-hazardous, but are among the top five
components In this product:
CHEMICAL NAME CAS NUMBER
HYDRO TREATED, SEVERE, LT. NAPHTHENIC DIST. 64742-52-5
GEAR LUBE MIXTURE
PENNSYLVANIA RIGHT-TO-KNOW:
The following non-hazardous ingredients are present in the product at greater
than 3%:
CHEMICAL NAME CAS NUMBER
HYDRO TREATED, SEVERE, LT. NAPHTHENIC DIST. 64742-52-5
CALIFORNIA PROPOSITION 65:
WARNING: The chemicals (s) noted below and contained in this product, are known
To the state of California to cause cancer, birth defects or other reproductive
harm:
CHEMICAL NAME CAS NUMBER
No Proposition 65 chemicals exist in this product.
INTERNATIONAL REGULATIONS: AS FOLLOWS -
CANADIAN WHMIS: This MSDS has been prepared in compliance with Controlled
Product Regulations except for use of the 16 headings.
CANADIAN WHMIS CLASS: No information available.
SECTION 16 - OTHER INFORMATION
HMIS RATINGS - HEALTH: 1 FLAMMABILITY: 4 REACTIVITY: 0
PREVIOUS MSDS REVISION DATE: 05/11/05
VOLATILE ORGANIC COMPOUNDS (VOCS): 5.19 lbs/gal, 622 grams/ltr
LEGEND: N.A. - Not Applicable, N.E. - Not Established,
N.D. - Not Determined
*** THIS MSDS IS NOT FOR REPRODUCTION OR REPRODUCTION OR DISTRIBUTION ***
The information contained on this MSDS has been checked and should be accurate.
However, it is the responsibility of the user to comply with all Federal,
State, and Local Laws and regulations.
<END OF MSDS>
The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance. For more product information by email, click here Imperial Supplies LLC does not provide services and products outside the United States |
Printer-Friendly View
