![]() |
![]() |
![]() |
|
| Home > Products > Chemicals & Paint > MSDS Sheets > MSDS 4613-4 -- [Back] | |||
|
MSDS 4613-4 4613-4: Cutting Oil 1 Gallon [6]4713: Cutting Oil 16 Oz Trigger [12] MSDS Last updated: 05/06/2005
MATERIAL SAFETY DATA SHEET
Cutting Oil
Flammability: 1
Instability: 0
Health; 1
Special: -
Printed; 02/22/2005
Revision: 02/22/2005
Date Created; 02/22/2005
1. PRODUCT AND COMPANY IDENTIFICATION
Product Code; 4613-4 & 4713
Product Name: Cutting Oil
Reference #: Lab-00019-2005
Manufacturer Information
Company Name: Imperial Supplies LLC
789 Packer Drive
P.O. Box 11008
Green Bay, WI 54307-1008
Emergency Contact: Chem Tel (800)255-3924
Information: (800)558-2808
2. COMPOSITION/INFORMATION ON INGREDIENTS
Hazardous Components CAS # Percentage OSHA ACGIH Other Limits
(Chemical Name) PEL TLV
--------------------------------------------------------------------------------
1. Petroleum hydrocarbon NA 100.0 % No data No data. No data
mixture
3. HAZARDS IDENTIFICATION
Emergency Overview
May cause irritation to eyes or skin.
Route(s) of Entry: Inhalation? Yes Skin? Yes Eyes? Yes
Ingestion? Yes
Potential Health Effects (Acute and Chronic)
Eye: Will cause slight eye irritation.
Oral: Essentially non-toxic
Skin: Prolonged or repeated exposure may cause skin irritation.
Signs and Symptoms Of Exposure
No data available.
OSHA Hazard Classes;
HEALTH HAZARDS; Irritant
PHYSICAL HAZARDS; No physical Hazards
TARGET ORGANS & EFFECTS; N/E
4. FIRST AID MEASURES
Emergency and First Aid Procedures
Eyes; In case of contact, immediately flush eyes with plenty of water for at
least 15 minutes. Call a physician.
Skin: In case of contact, immediately wash skin with soap and plenty of
water. If irritation develops consult a physician.
Inhalation: If inhaled, remove to fresh air. If not breathing, give
artificial respiration. If breathing is difficult, give oxygen. Call a
physician.
Oral; If swallowed, do not induce vomiting. Give large quantities of water.
Never give anything by mouth to an unconscious person. Call a physician.
Note to Physician
Gastric lavage by qualified medical personnel may be considered
depending on quantity of material ingested.
5. FIRE FIGHTING MEASURES
Flash Pt: 395.00 F (201.7 C)
Explosive Limits: LEL: No data. UEL: No data.
Auto ignition Pt: No data.
Fire Fighting Instructions
Water or foam may cause frothing. Use water to keep fire-exposed
containers cool. Water spray may be used to flush spills away from exposures.
Flammable Properties and Hazards
Do not enter enclosed or confined space without proper protective
equipment including respiratory protection.
Hazardous Combustion Products
Products of combustion may contain carbon monoxide, carbon dioxide
and other toxic materials.
Extinguishing Media
Water spray, dry chemical, CO2, foam.
Unsuitable Extinguishing Media
No data available.
6. ACCIDENTAL RELEASE MEASURES
Steps To Be Taken In Case Material Is Released Or Spilled
Contain spill immediately in smallest possible area. Recover as much
of the product as possible by shovel, vacuuming or other mechanical means.
Non-recovered product, contaminated soil, debris and other materials should
be placed in proper containers for ultimate disposal. Avoid washing, draining
or directing material to storm or sanitary sewers.
7. HANDLING AND STORAGE
Precautions To Be Taken in Handling
No special precautions expected to be needed under normal
conditions.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Respiratory Equipment (Specify Type)
None needed under normal conditions.
Eye Protection
Safety glasses recommended when exposure is likely.
Protective Gloves
Chemically resistant gloves recommended when exposure is likely.
Engineering Controls (Ventilation etc.)
Normal shop ventilation should be adequate under normal use.
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical States: [ ] Gas [X] Liquid [ ] Solid
Melting Point: No data.
Boiling Point: No data
Auto ignition Pt: No data.
Flash Pt: 395.00 F (201.7 C) Method:
Explosive Limits: LEL: No data. UEL: No data.
Specific Gravity (Water =1): .88
Vapor Pressure (vs. Air or mm Hg): No data.
Vapor Density (vs. Air = 1): No data.
Evaporation Rate (vs Butyl Nil
Acetate = 1):
Solubility in Water; No data
Other Solubility Notes: Negligible in water
Percent Volatile: No data
Corrosion Rate: No data
pH: No data
Appearance and Odor:
Medium amber liquid with mild sulfur odor.
10. STABILITY AND REACTIVITY
Stability: Unstable [ ] Stable [X]
Conditions To Avoid - Instability
No data available.
Incompatibility - Materials To Avoid
Strong oxidizing materials.
Hazardous Decomposition Or Byproducts
Carbon monoxide and carbon dioxide.
Hazardous Polymerization: Will occur [ ] Will not occur [X]
Conditions To Avoid - Hazardous Polymerization
No data available.
11. TOXICOLOGICAL INFORMATION
Toxicological Information
No data available.
Carcinogenicity/Other Information
This material is not known to contain any chemical listed as a
carcinogen or suspected carcinogen by OSHA, IARC or the National Toxicology
Program (NTP) at a concentration greater than 0.1%.
Carcinogenicity: NTP? No IARC Monographs? No OSHA Regulated? No
12. ECOLOGICAL INFORMATION
Ecological Information
No data available.
13. DISPOSAL CONSIDERATIONS
Waste Disposal Method
Recycle as much of the recoverable product as possible. Treatment,
storage, transportation and disposal must be in accordance with applicable
Federal, State/Provincial, and Local regulations.
14. TRANSPORT INFORMATION
LAND TRANSPORT (US DOT)
DOT Proper Shipping Name
Not regulated
15. REGULATORY INFORMATION
US EPA SARA Title III
Hazardous Components CAS # Sec. 302 Sec. 304 Sec. 313 Sec. 110
(Chemical Name) (EHS) RQ (TRI)
--------------------------------------------------------------------------------
1. Petroleum hydrocarbon NA No No No No
mixture
US EPA CAA, CWA, TSCA
Hazardous Components CAS # EPA CAA EPA CWA EPA CA PROP
(Chemical Name) NPDES TSCA 65
--------------------------------------------------------------------------------
1. Petroleum hydrocarbon NA No No No No
mixture
SARA (Superfund Amendments and
Reauthorization Act of 1986) Lists:
Sec. 302: EPA SARA Title III Section 302 Extremely Hazardous Chemical with TPQ.
* indicates 10000 LB TPQ if not volatile
Sec. 304: EPA SARA Title III Section 304: CERCLA Reportable + Sec. 302 with
Reportable Quantity.
** indicates statutory RQ.
Sec. 313: EPA SARA Title III Section 313 Toxic Release Inventory. Note: -Cat
indicates a member of a chemical category.
Sec. 110: EPA SARA 110 Superfund Site Priority Contaminant List
TSCA (Toxic Substances Control Act) Lists:
5A(2): Chemical Subject to Significant New Rules (SNURS)
6A; Commercial Chemical Control Rules
8A: Toxic Substances Subject to Information Rules on Production.
8A CAIR: Comprehensive Assessment Information Rules - (CAIR)
8A PAIR: Preliminary Assessment Information Rules - (PAIR)
8C: Records of Allegations of Significant Adverse Reactions
8D: Health and Safety Data Reporting Rules
8D TERM: Health and Safety Data Reporting Rule Terminations
Other Important Lists:
CWA NPDES: EPA Clean Water Act NPDES Permit Chemical
CAA HAP: EPA Clean Air Act Hazardous Air Pollutant
CAA ODC: EPA Clean Air Act Ozone Depleting Chemical (1=CFC, 2=HCFC)
CA PROP 65: California Proposition 65
Regulatory Information
This product does not contain any chemical that require reporting
under Section 313 of the Emergency Planning and Community Right to Know Act of
1986 or of 40CFR372.
EPA Hazard Categories;
This material meets the EPA 'Hazard Categories' defined for SARA
Title III
Sections 311/312 as indicated:
[X] Yes [ ] No Acute (immediate) Health Hazard
[ ] Yes [X] No Chronic (delayed) Health Hazard
[ ] Yes [X] No Fire Hazard
[ ] Yes [X] No Reactive Hazard
[ ] Yes [X] No Sudden Release of Pressure Hazard
Regulatory Information Statement
The information contained herein is based on data considered
accurate. However, no warranty is expressed or implied regarding the accuracy of
this data or the results to be obtained from the use thereof. Vendor assumes no
responsibility for injury to vendee or third person proximately caused by the
material if reasonable safety procedures are not adhered to as stipulated in the
data sheet. Additionally, vendor assumes no responsibility for injury to vendee
or third persons proximately caused by abnormal use of the material even if
reasonable safety procedures are followed. Furthermore, vendee assumes all risk
in use of the material.
16. OTHER INFORMATION
Company Policy or Disclaimer
THIS INFORMATION IS FURNISHED WITHOUT WARRANTY,
EXPRESSED OF IMPLIED, EXCEPT THAT IS ACCURATE TO THE
BEST KNOWLEDGE OF EXCELDA MANUFACTURING. THE DATA
ON THIS SHEET RELATES ONLY TO THE SPECIFIC MATERIAL
DESIGNATED HEREIN. EXCELDA MANUFACTURING ASSUMES
NO LEGAL RESPONSIBILITY FOR USE OR RELIANCE UPON THIS
DATA.
Licensed to Excelda Manufacturing, Inc. ANSI Z400.1 Format
The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance. For more product information by email, click here Imperial Supplies LLC does not provide services and products outside the United States |