MSDS 4037

GPMI COMPANY                 GPMI COMPANY
                             1051 N. FIESTA BLVD.
                             GILBERT, AZ  85233

                                  MSDS
                           MATERIAL SAFETY DATA SHEET

                             PRODUCT: GLASS CLEANER

SECTION 1 - IDENTIFICATION OF PRODUCT AND COMPANY

Product (Trade) Name:  GLASS CLEANER         NPCA Hazardous Materials
Manufacturer's Name:   GPMI  Company         Rating Identification System
Street Address:        1051 N. Fiesta Blvd.  4 = Extreme             Health: 1
City, State, Zip:      Gilbert, AZ 85233     3 = High          Flammability: 0
Phone Number:          480-503-0006          2 = Moderate        Reactivity: 0
Emergency Phone:       480-503-0006          1 = Slight  SpecialProtection:  0
Chemical Name & Synonyms:                    0 = Insignificant
Chemical Family:       N/A
Formula:               Trade Secret

SECTION 2 - COMPOSITION / INFORMATION ON INGREDIENTS

Proprietary
2-Propanol,  CAS # 67-63-0                         </=5%
Ethylene Glycol Monobutyl Ether, CAS # 111-76-2    </=5%
Water, CAS # 7732-18-5                             </=90%

SECTION 3 - PHYSICAL DATA

Boiling Point:               212 F            Specific Gravity (H2O=1) 0.98
Vapor Pressure (mm hg):      Like Water       Vapor Density:        Like Water
Solubility in Water:         Completely       Percent Volatile by Weight: N/A
Evaporation Rate:            1                Melting Point:              N/A
Appearance:                  Clear liquid     Freezing Point:             N/A
Odor:                        Alcohol odor     Volatiles:                  N/A
pH:                          N/A              Percent Active:             N/A

SECTION 4 - FIRE & EXPLOSION HAZARD DATA

Flash Point (method used):        None
Upper Explosive Limit:            N/A
Lower Explosive Limit:            N/A
Extinguishing Media:              Water, Foam, CO2 & Dry Chemical
Special Fire Fighting Procedures: None
Unusual Fire & Explosion Hazards: None

SECTION 5 - REACTIVITY DATA

Stability:                                   Stable
Conditions to Avoid:                         None
Incompatibility (Materials to Avoid):        Oxidizers
Hazardous Decomposition Products:            None
Hazardous Polymerization:                    Will not occur.

SECTION 6 - HEALTH HAZARDS & FIRST AID

Route(s) of Entry:      Inhalation, Ingestion
Effects of Overexposure
By Inhalation:         Remove to fresh air.
By Eye Contact:        Irritation.
By Ingestion:          Nausea, shortness of breathe.
By Skin Contact:       May cause irritation.
Emergency & First Aid Procedures:
For Inhalation:        Move to fresh air. Seek medical attention if
                       irritation persists.
For Eye Contact:       Flush eyes for 15 minutes. Seek medical attention.
                       Do not induce vomiting. Drink large amounts of water
                       or milk.
For Ingestion:         Seek medical attention.
                       Flush with plenty of water for 15 minutes.
For Skin Contact:      Wash contaminated clothing. Seek medical
                       attention if irritation persists.

SECTION 7 - STORAGE & HANDLING INFORMATION

Keep in cool dry area. Store no more than 1 year. Keep out of reach of
children.

SECTION 8 - SPILL OR LEAK PROCEDURES

Small or Large Spill:  Contain spill, and rinse area with plenty of water.
Waste Disposal Method: Dispose of in accordance with state, local, federal
                       law.

SECTION 9 - SPECIAL PROTECTION INFORMATION

For Handling Product as Supplied:
Respiratory Protection;  None                 Ventilation:       Local Exhaust
Protective Gloves:       Rubber if desired    Other Protective Equipment: None
                         Chemical Goggles if
Eye Protection:          desired.
For Handling Product After Dilution For Use:
Respiratory Protection:  None                  Ventilation:       Local Exhaust
Protective Gloves:       Rubber if desired     Other Protective Equipment: None
Eye Protection:          Goggles if desired

SECTION 10 - ADDITIONAL INFORMATION

N/A = Not Applicable     N/D = Not Determined    N/E = Not Established

The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance.

© 2008 Imperial Supplies LLC Questions or comments? Contact us.