Share
Print
APPROVED SUPPLIER
DOT Approved Male Bulkhead Male, Push-To-Connect Air Brake Fitting, Brass, 3/8" x 1/2"
Technical Specifications
Brand
APPROVED SUPPLIER
Meets Standards
DOT FMVSS 571.106, SAE J2494, SAE J2494-3
Brass DOT Push-to-Connect Fittings Type
Connectors
Package Quantity
1
Connection Type
Male
Pipe Thread
1/2 in.
DOT Approved
Yes
Shape
Bulkhead Male
Fitting Style
Push-To-Connect
Shipping Weight
0.45 lb.
Fitting Type
Push-To-Connect
System of Measurement
Fractional
Gasket Material
Buna N
Tube Outside Diameter
3/8 in.
Hex Size
3/8 in.
Working Pressure
250 psi
Material
Brass
Product Description
Brass Ptc DOT Fitting
- Designed For All D.O.T. Truck And Trailer Applications, These Fittings Reduce Assembly Time Versus Compression Style Fittings By 90%.
Assembly | Disassembly |
Insert tube end into fitting, sliding I.D. of the tube over insert (friction is felt as tube slides past O-Ring). Continue to push tube in until it bottoms out. | Use thumb and forefinger to disconnect tube. Hold down the top of the insert against the fitting body and pull out the tubing with the other hand. No tools needed. |
Compliance & Restrictions
WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Barcode
A/B Ptc Dot Bh Ml Conn 3/8X1/2
Name | Item | Description | |
---|---|---|---|
UNSPSC CODES | 40141700 | ||
VMRS (ATA) CODES | 053-008-004 | A/B M BH CON 3/8"X1/2" |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here