Share
Print
APPROVED SUPPLIER
DOT Approved Male Connector, Push-To-Connect Air Brake Fitting, Brass 1/4" x 1/8"
Technical Specifications
Brand
APPROVED SUPPLIER
Meets Standards
DOT FMVSS 571.106 and SAE J1131
Brass DOT Push-to-Connect Fittings Type
Connectors
Mfr. Part Number
91220-4
Connection Type
Male
Package Quantity
100
DOT Approved
Yes
Pipe Thread
1/8 in.
Fitting Material
Brass
Shape
Connector
Fitting Type
Push-To-Connect
Shipping Weight
2.38 lb.
Gasket Material
Ethylene Propylene
System of Measurement
Fractional
Grade
0
Tube Outside Diameter
1/4 in.
Hex Size
7/16 in.
Vibration Resistance
Moderate
Material
Brass
Working Pressure
up to 250 psi
Product Description
Brass Push-To-Connect Air Brake Fitting Male Connector
- 1/4 Tube X 1/8 Male Npt
- Material Of Construction: Brass
- Pre-Applied PTFE Based Pipe Sealant On All Male Pipe Threads
- DOT Fmvss-106 Compliant
- Working Pressure: Up To 250 PSI
- Temperature Range: From -20° F To 200°
Assembly | Disassembly |
Insert tube end into fitting, sliding I.D. of the tube over insert (friction is felt as tube slides past O-Ring). Continue to push tube in until it bottoms out. | Use thumb and forefinger to disconnect tube. Hold down the top of the insert against the fitting body and pull out the tubing with the other hand. No tools needed. |
Compliance & Restrictions
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Lot Tracked Item Details
Item Barcode
A/B Ptc Male Conn 1/4X1/8
Name | Item | Description | |
---|---|---|---|
WEATHERHEAD | 1868X4 | A/B PTC ML CONN 1/4X1/8 | |
UNSPSC CODES | 27131600 | Air fittings and connectors | |
VMRS (ATA) CODES | 053-008-004 | A/B PTC ML CONN 1/4X1/8 |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here