Product Categories See All
Track Order Status
SDS Sheet 0076090Printer Friendly View
SECTION 1: IDENTIFICATION 1.1. Product Identifier Product Form: Product Name: Lock-Ease CAS No: Synonyms: Graphited Lock Fluid 1.2. Intended Use of the Product Use of the substance/mixture: All types of locks, household appliances, tools, guns, reels and other mechanisms. 1.3. Name, Address, and Telephone of the Responsible Party Company AGS Company P.O. Box 729 Muskegon, MI 49443 Phone: 800-253-0403 1.4. Emergency Telephone Number Emergency | 800-255-3924 number | SECTION 2: HAZARDS IDENTIFICATION 2.1. Classification of the Substance or Mixture Classification (GHS-US) Germ Cell |Category 1B Mutagenicity | Carcinogenicit|Category 1B y | Aspiration |Category 1 Toxicity | Flammable |Category 3 liquids | 2.2. Label Elements GHS-US Labeling Hazard Pictograms (GHS-US) |Health Hazard |Flame Signal Word (GHS-US) |Danger Hazard Statements (GHS-US) |May cause genetic defects |May cause cancer |May be fatal if swallowed and enters airways |Flammable liquid and vapor. Precautionary Statements |Prevention: (GHS-US) |Obtain special instructions before use |Do not handle until all safety precautions have been |read and understood |Use personal protective equipment as required |Keep away from heat/sparks/open flames/hot surfaces |- No smoking |Keep container tightly closed |Ground/bond container and receiving equipment |Use explosion-proof |electrical/ventilating/lighting/equipment |Use only non-sparking tools |Take precautionary measures against static |discharge. | |General Advice: |If exposed or concerned: Get medical |attention/advice | |Skin: |IF ON SKIN (or hair): Take off immediately all |contaminated clothing. Rinse skin with water/shower | |Ingestion: |IF SWALLOWED: Immediately call a POISON CENTER or |doctor/physician |Do NOT induce vomiting | |Fire: |In case of fire: Use CO2, dry chemical, or foam for |extinction | |Storage: |Store locked up |Store in a well-ventilated place. Keep cool. | |Disposal: |Dispose of contents/container to an approved waste |disposal plant 2.3. Other Hazards Other Hazards Not Contributing to the Classification: Not applicable 2.4. Unknown Acute Toxicity (GHS-US) 0% of the mixture consists of ingredient(s) of unknown toxicity. SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS 3.1. Substance Name |Product identifier |% |Classification | | |(GHS-US) | | | | | | | | | | | | | | | Full text of H-phrases: See Section 16 3.2. Mixture Name 4.1. Description of First Aid Measures First-aid Measures General: First-aid Measures After Inhalation: Move to fresh air in case of accidental inhalation of vapors. First-aid Measures After Skin Contact: Take off contaminated clothing and wash before reuse. First-aid Measures After Eye Contact: Rinse thoroughly with plenty of water, also under the eyelids. Keep eye wide open while rinsing. Get medical attention if irritation persists. First-aid Measures After Ingestion: Call a physician or Poison Control Center immediately. Do NOT induce vomiting. 4.2. Most important symptoms and effects, both acute and delayed Symptoms/Injuries: No information available. Symptoms/Injuries After Inhalation: Symptoms/Injuries After Skin Contact: Symptoms/Injuries After Eye Contact: Symptoms/Injuries After Ingestion: Chronic Symptoms: 4.3. Indication of Any Immediate Medical Attention and Special Treatment Needed Notes to Physician: Aspiration hazard. SECTION 5: FIRE-FIGHTING MEASURES 5.1. Extinguishing Media Suitable Extinguishing Media: Use: Carbon dioxide (CO 2 ). Dry chemical. Foam. Water spray. Unsuitable Extinguishing Media: CAUTION: Use of water spray when fighting fire may be inefficient. 5.2. Special Hazards Arising From the Substance or Mixture Fire Hazard: Flammable. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Explosion Hazard: Sensitivity to Mechanical Impact: None. Sensitivity to Static Discharge: Yes. Reactivity: 5.3. Advice for Firefighters Precautionary Measures Fire: Firefighting Instructions: Protection During Firefighting: As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear. SECTION 6: ACCIDENTAL RELEASE MEASURES 6.1. Personal Precautions, Protective Equipment and Emergency Procedures General Measures: ELIMINATE all ignition sources (no smoking, flares, sparks or flames in immediate area). Evacuate personnel to safe areas. Keep people away from and upwind of spill/leak. Take precautionary measures against static discharges. All equipment used when handling the product must be grounded. 6.1.1. For Non-emergency Personnel Protective Equipment: Emergency Procedures: 6.1.2. For Emergency Responders Protective Equipment: Emergency Procedures: 6.2. Environmental Precautions Do not flush into surface water or sanitary sewer system. Do not allow material to contaminate ground water system. See Section 12 for additional Ecological Information. 6.3. Methods and Material for Containment and Cleaning Up For Containment: A vapor suppressing foam may be used to reduce vapors. Methods for Cleaning Up: Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Non-sparking tools should be used. Sweep up and shovel into suitable containers for disposal. 6.4. Reference to Other Sections See heading 8, Exposure Controls and Personal Protection. SECTION 7: HANDLING AND STORAGE 7.1. Precautions for Safe Handling Additional Hazards When Processed: Use only in an area containing flame proof equipment. Use only in area provided with appropriate exhaust ventilation. To avoid ignition of vapors by static electricity discharge, all metal parts of the equipment must be grounded. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear personal protective equipment. Avoid breathing vapors. Remove and wash contaminated clothing before re-use. Hygiene Measures: Do not eat, drink or smoke when using this product. Provide regular cleaning of equipment, work area and clothing. 7.2. Conditions for Safe Storage, Including Any Incompatibilities Technical Measures: Storage Conditions: Keep away from open flames, hot surfaces and sources of ignition. Keep container tightly closed in a dry and well-ventilated place. 7.3. Specific End Use(s) SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1. Control Parameters Exposure Guidelines: Chemical Name ACGIH TLV OSHA PEL NIOSH IDLH Stoddard solvent 8052-41-3 TWA: 100 ppm TWA: 500 ppm TWA: 2900 mg/m3 (vacated) TWA: 100 ppm (vacated) TWA: 525 mg/m3 IDLH: 20000 mg/m3 Ceiling: 1800 mg/m3 15 min TWA: 350 mg/m3 Graphite 7782-42-5 - TWA: 15 mg/m3 total dust synthetic TWA: 5 mg/m3 total dust synthetic (vacated) TWA: 2.5 mg/m3 respirable dust natural (vacated) TWA: 10 mg/m3 total dust synthetic (vacated) TWA: 5 mg/m3 respirable fraction synthetic TWA: 15 mppcf natural IDLH: 1250 mg/m3 TWA: 2.5 mg/m3 respirable dust Aluminum iso-propoxide 555-31-7 TWA: 1 mg/m3 respirable fraction - - Ethylbenzene 100-41-4 TWA: 20 ppm TWA: 100 ppm TWA: 435 mg/m3 (vacated) TWA: 100 ppm (vacated) TWA: 435 mg/m3 (vacated) STEL: 150 ppm (vacated) STEL: 655 mg/m3 IDLH: 800 ppm TWA: 100 ppm TWA: 435 mg/m3 STEL: 125 ppm STEL: 545 mg/m3 Naphthalene 91-20-3 STEL: 15 ppm TWA: 10 ppm S* TWA: 10 ppm TWA: 50 mg/m3 (vacated) TWA: 10 ppm (vacated) TWA: 50 mg/m3 (vacated) STEL: 15 ppm (vacated) STEL: 75 mg/m3 IDLH: 250 ppm TWA: 10 ppm TWA: 50 mg/m3 STEL: 15 ppm STEL: 75 mg/m3 Calcium hydroxide 1305-62-0 TWA: 5 mg/m3 TWA: 15 mg/m3 total dust TWA: 5 mg/m3 respirable fraction (vacated) TWA: 5 mg/m3 not in effect as a result of reconsideration TWA: 5 mg/m3 Toluene 108-88-3 TWA: 20 ppm TWA: 200 ppm (vacated) TWA: 100 ppm (vacated) TWA: 375 mg/m3 (vacated) STEL: 150 ppm (vacated) STEL: 560 mg/m3 Ceiling: 300 ppm IDLH: 500 ppm TWA: 100 ppm TWA: 375 mg/m3 STEL: 150 ppm STEL: 560 mg/m3 Benzene 71-43-2 STEL = 2.5 ppm TWA: 0.5 ppm S* TWA: 1 ppm TWA: 10 ppm (vacated) TWA: 10 ppm (vacated) STEL: 50 ppm (vacated) Ceiling: 25 ppm Ceiling: 25 ppm STEL: 5 ppm IDLH: 500 ppm TWA: 0.1 ppm STEL: 1 ppm ACGIH TLV: American Conference of Governmental Industrial Hygienists - Threshold Limit Value. OSHA PEL: Occupational Safety and Health Administration - Permissible Exposure Limits. NIOSH IDLH: Immediately Dangerous to Life or Health. 8.2. Exposure Controls Appropriate Engineering |Showers. Eyewash stations. Explosion proof Controls |ventilation systems. Personal Protective Equipment| Materials for Protective | Clothing | Hand Protection | Eye Protection |Safety glasses with side-shields. Skin and Body Protection |Wear protective gloves/clothing. Respiratory Protection |If exposure limits are exceeded or irritation is |experienced, NIOSH/MSHA approved respiratory |protection should be worn. Positive-pressure |supplied air respirators may be required for high |airborne contaminant concentrations. Respiratory |protection must be provided in accordance with |current local regulations. Thermal Hazard Protection | SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES 9.1. Information on Basic Physical and Chemical Properties Physical State |Liquid Appearance |Dark gray Odor |Solvent Odor Threshold |No information available pH |No data available Relative Evaporation Rate |Slower than Butyl Acetate (butylacetate=1) | Melting Point |No data available Freezing Point | Boiling Point |156-197 °C / 312-387 °F Flash Point |38 °C / 101 °F Auto-ignition Temperature |No data available Decomposition Temperature |No data available Flammability (solid, gas) |No data available Vapor Pressure |1-5 Relative Vapor Density at 20 °C |Heavier than air (Air = 1) Relative Density |No data available Specific Gravity |0.7963 Solubility |No data available Partition coefficient: |No data available n-octanol/water | Viscosity |No data available Lower Flammable Limit |No data available Upper Flammable Limit |No data available 9.2. Other Information VOC Content (%): No data available SECTION 10: STABILITY AND REACTIVITY 10.1 Reactivity No data available. 10.2 Chemical Stability Stable under recommended storage conditions. 10.3 Possibility of Hazardous Reactions None under normal processing. 10.4 Conditions to Avoid Heat, flames and sparks. 10.5 Incompatible Materials Strong acids. Strong bases. Strong oxidizing agents. 10.6 Hazardous Decomposition Products None known based on information supplied. SECTION 11: TOXICOLOGICAL INFORMATION 11.1. Information on Toxicological Effects Acute Toxicity: Numerical measures of toxicity - Product Acute Toxicity 0% of the mixture consists of ingredient(s) of unknown toxicity. Skin Corrosion/Irritation: Serious Eye Damage/Irritation: Respiratory or Skin Sensitization: No information available. Germ Cell Mutagenicity: May cause genetic defects. Carcinogenicity: The classification as a carcinogen need not apply if it can be shown that the substance contains less than 3 % DMSO extract as measured by IP 346 The table below indicates whether each agency has listed any ingredient as a carcinogen. Chemical Name ACGIH IARC NTP OSHA Petroleum distillates, hydrotreated heavy naphthenic A2 Group 1 X Ethylbenzene A3 Group 2B - - Reproductive Toxicity: No information available. Specific Target Organ Toxicity (Single Exposure): No information available. Specific Target Organ Toxicity (Repeated Exposure): No information available. Aspiration Hazard: May be fatal if swallowed and enters airways Symptoms/Injuries After Inhalation: May cause irritation of respiratory tract. Symptoms/Injuries After Skin Contact: May cause irritation. Symptoms/Injuries After Eye Contact: May cause slight irritation. Symptoms/Injuries After Ingestion: May be fatal if swallowed and enters airways. Chronic Symptoms: SECTION 12: ECOLOGICAL INFORMATION 12.1. Toxicity Ecotoxicity: The environmental impact of this product has not been fully investigated. 12.2. Persistence and Degradability No information available. 12.3. Bioaccumulative Potential No information available. 12.4. Mobility in Soil 12.5. Other Adverse Effects No information available. SECTION 13: DISPOSAL CONSIDERATIONS 13.1. Waste treatment methods Waste Disposal Recommendations: Waste Disposal Methods: This material, as supplied, is a hazardous waste according to federal regulations (40 CFR 261). Additional Information: Contaminated Packaging: Empty containers pose a potential fire and explosion hazard. Do not cut, puncture or weld containers. Empty containers should be taken to an approved waste handling site for recycling or disposal. Do not re-use empty containers. SECTION 14: TRANSPORT INFORMATION 14.1 In Accordance with DOT Proper Shipping Name |Petroleum distillates, n.o.s. Hazard Class |3 |
The information contained in this SDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this 'SDS' shall be created or inferred by any statement in this 'SDS'. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this 'SDS'. The user is responsible for full compliance.